EUVIMEDEUVIMED entdecken
Crossref

Development of a High‐Protein Seed Mix‐Dates‐Based 3D Printed Snack: Rheological Assessments, Printing Process Optimization and Post‐Processing

Pilli Pavan Sreehitha, Praveena Balasubramanian, R. K. Anushree, Jeyan Arthur Moses, V. R. Sinija, M. Loganathan

Journal of Food Process Engineering · 2026-11 · 49 (11)

DOI: 10.1111/jfpe.70862 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Food Process Engineering, online erschienen am 09.11.2026. Verfasst von Pilli Pavan Sreehitha und 5 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three‐dimensional food printing (3DFP) has emerged as a promising method for creating personalized nutrient‐rich foods with specific functionality and structure. In this study, a high‐protein, edible seed‐based ink (SBI) was developed using equal proportions of sunflower, watermelon, and black sesame seeds, alongside a naturally sweetened date‐based ink (DBI) composed of date pulp (DP) and date syrup (DS). The rheological properties of both inks were systematically analyzed, focusing on shear‐thinning and structural recovery behavior. The inks had loss factor (tan δ ) values of 0.40–0.44, signifying appropriate viscoelastic properties for extrusion, with structural recovery of 64.99% for the SBI and 58.80% for the DBI, validating their capacity to preserve shape integrity. For both inks, the optimization of printing parameters was performed independently. The SBI exhibited optimal performance with a 1.2 mm nozzle diameter, 67% infill density, rectilinear infill pattern, and 600 mm/min printing speed, 30 rpm motor speed, and 3 bar pressure, with the selection further corroborated by structural stability post freeze‐drying. The DBI was optimized using a 1.2 mm nozzle, 33% infill, grid infill pattern, 600 mm/min printing speed, 30 rpm motor speed, and 2 bar pressure. After post‐processing, the a w of the SBI construct decreased from 0.91 ± 0.01 to 0.63 ± 0.02, indicating shelf stability, with a protein content of 32.37% ± 1.14%, signifying a protein‐rich food product. Under optimum conditions, dual‐ink 3D printed structures were printed in alternating structure (seed‐date) and sandwich (seed‐date‐seed) configurations. The alternating structure exhibited superior sensory acceptance. Overall, this study demonstrates the effective integration of rheological optimization with dual‐ink printing to create functional high‐protein 3D printed foods.

Zitieren

APA

Sreehitha, P. P., Balasubramanian, P., Anushree, R. K., Moses, J. A., Sinija, V. R., & Loganathan, M. (2026). Development of a High‐Protein Seed Mix‐Dates‐Based 3D Printed Snack: Rheological Assessments, Printing Process Optimization and Post‐Processing. Journal of Food Process Engineering, 49(11). https://doi.org/10.1111/jfpe.70862

Vancouver

Sreehitha PP, Balasubramanian P, Anushree RK, Moses JA, Sinija VR, Loganathan M. Development of a High‐Protein Seed Mix‐Dates‐Based 3D Printed Snack: Rheological Assessments, Printing Process Optimization and Post‐Processing. Journal of Food Process Engineering. 2026;49(11). doi:10.1111/jfpe.70862

BibTeX
@article{Sreehitha2026,
  author = {Sreehitha, Pilli Pavan and Balasubramanian, Praveena and Anushree, R. K. and Moses, Jeyan Arthur and Sinija, V. R. and Loganathan, M.},
  title = {Development of a High‐Protein Seed Mix‐Dates‐Based 3D Printed Snack: Rheological Assessments, Printing Process Optimization and Post‐Processing},
  journal = {Journal of Food Process Engineering},
  year = {2026},
  volume = {49},
  number = {11},
  doi = {10.1111/jfpe.70862}
}
Kostenlos starten →