EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Repair Bond Strength of Self‐Cure Bulk‐Fill Composites: Influence of Substrate Composition, Surface Conditioning, and Repair Material Type

Esra Yildirim-Manav iD, Sema Yazici-Akbiyik iD, Sedanur Sakalli iD, Simge Canatan-Keskin iD, Sıla Nur Usta iD

Journal of Esthetic and Restorative Dentistry · 2026-12 · 38 (12) · 2288-2295

DOI: 10.1111/jerd.70243 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Esthetic and Restorative Dentistry, online erschienen am 27.07.2026. Verfasst von Esra Yildirim-Manav und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Dentistry, Department of Restorative Dentistry, Lokman Hekim University, Ankara, Turkey. Hauptthemen laut MEDLINE: Composite Resins, Dental Bonding. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

This in vitro study aimed to evaluate the effects of substrate composition, surface conditioning protocol, and repair material type on the repair shear bond strength (SBS) of an aged self‐cure bulk‐fill resin composite. Materials and Methods A total of 80 specimens were fabricated using two substrate compositions of a self‐cure bulk‐fill composite (Stela; Automix and Capsule). After initial aging by thermocycling, specimens were repaired according to a 2 × 2 × 2 factorial design based on surface conditioning (mechanical roughening with or without 37% phosphoric acid etching) and repair material type (self‐cure composite with proprietary primer or light‐cure nanohybrid composite with a universal adhesive). SBS was measured using a universal testing machine. Failure modes were analyzed using a stereomicroscope. Data were analyzed using three‐way ANOVA, Tukey's HSD, and Fisher's exact tests ( p < 0.05).

Results

Substrate composition, surface conditioning protocol, and repair material type each significantly affected repair bond strength ( p < 0.001). Capsule‐based substrates showed higher SBS values than Automix substrates. Phosphoric acid etching significantly increased SBS compared with mechanical roughening alone. Repairs performed with the same self‐cure composite exhibited significantly higher SBS than those repaired with a light‐cure composite. Significant two‐way interactions were observed between substrate composition × repair material type ( p < 0.001) and surface conditioning × repair material type ( p = 0.015). The highest SBS was observed in the Capsule + acid etching + self‐cure repair group. Failure mode analysis revealed predominantly cohesive or mixed failures in self‐cure repair groups, whereas light‐cure repair groups showed a higher frequency of adhesive failures.

Conclusion

Repair bond strength of a self‐cure bulk‐fill composite is highly material‐ and protocol‐dependent. Utilizing a chemically compatible self‐cure material system combined with adjunctive phosphoric acid etching significantly optimizes repair longevity, especially when applied to mechanically triturated capsule‐based substrates. Clinical Significance The selection of repair material and surface conditioning protocol significantly influences the repair bond strength of aged self‐cure bulk‐fill composites. When the original restorative material is known, repair with the same composite system following phosphoric acid conditioning may provide more durable bonding.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Composite ResinsDental BondingSurface PropertiesShear StrengthMaterials TestingDental Stress AnalysisIn Vitro Techniques

Stichwörter der Autor:innen

composite repairself‐cure bulk‐fill compositeshear bond strengthsurface conditioninguniversal adhesive

Substanzen

Composite Resins

Autor:innen und Institutionen

  • Faculty of Dentistry, Department of Restorative Dentistry, Lokman Hekim University, Ankara, Turkey.
  • Private Dental Clinic, Ankara, Turkey.
  • Faculty of Dentistry, Department of Endodontics, University of Health Sciences, Ankara, Turkey.

ORCID-Profile: Esra Yildirim-Manav, Sema Yazici-Akbiyik, Sedanur Sakalli, Simge Canatan-Keskin, Sıla Nur Usta

Zitieren

APA

Yildirim-Manav, E., Yazici-Akbiyik, S., Sakalli, S., Canatan-Keskin, S., & Usta, S. N. (2026). Repair Bond Strength of Self‐Cure Bulk‐Fill Composites: Influence of Substrate Composition, Surface Conditioning, and Repair Material Type. Journal of Esthetic and Restorative Dentistry, 38(12), 2288-2295. https://doi.org/10.1111/jerd.70243

Vancouver

Yildirim-Manav E, Yazici-Akbiyik S, Sakalli S, Canatan-Keskin S, Usta SN. Repair Bond Strength of Self‐Cure Bulk‐Fill Composites: Influence of Substrate Composition, Surface Conditioning, and Repair Material Type. Journal of Esthetic and Restorative Dentistry. 2026;38(12):2288-2295. doi:10.1111/jerd.70243

BibTeX
@article{YildirimManav2026,
  author = {Yildirim-Manav, Esra and Yazici-Akbiyik, Sema and Sakalli, Sedanur and Canatan-Keskin, Simge and Usta, Sıla Nur},
  title = {Repair Bond Strength of Self‐Cure Bulk‐Fill Composites: Influence of Substrate Composition, Surface Conditioning, and Repair Material Type},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2026},
  volume = {38},
  number = {12},
  pages = {2288--2295},
  doi = {10.1111/jerd.70243}
}
Kostenlos starten →