Vickers Microhardness and Raman Spectroscopic Study of Low‐Iron‐Containing Mixed Alkaline Earth Aluminosilicate Glasses
Journal of the American Ceramic Society · 2026-11 · 109 (11)
DOI: 10.1111/jace.71447 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 15.11.2026. Verfasst von Jiayi Shi und 3 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
We studied the Vickers microhardness ( H V ) of mixed alkaline‐earth aluminosilicate glasses with 0.04–0.64 wt% Fe 2 O 3 , with and without hydration in 121°C deionized water (DIW) for 540 and 720 min. The indentation measurements covered the applied loads ( P ) from 0.015 to 0.5 kgf, plus limited tests at lower loads of 0.00025 and 0.005 kgf. Reverse indentation size effect (RISE) was observed for all cases; that is, H V increased with increasing P . The proportional specimen resistance (PSR) model, originally proposed to simulate the normal indentation size effect (ISE), that is, microhardness decreases with increasing P, was also successfully applied to RISE in this study. Based on these findings, we proposed adding the indentation‐induced microcracking effect to the a 1 term in the PSR model. The combined effect of the specimen elastic recovery, interfacial friction at the indenter/sample interface, and sample microcracking can influence the overall H V –P characteristics, ISE or RISE, depending on the contribution of microcracking to H V of the system during the indenter loading cycle. We also applied the PSR model to estimate the load‐independent Vickers microhardness ( H V0 ) for the glasses with and without hydration in the relationship to Si─O─Si hydrolysis. We also carried out a Raman spectroscopic study of unhydrated glasses to elucidate plausible structural influences on H V0 and revealed a nonlinear effect of Q 3 units (three bridging oxygens per SiO 4 tetrahedral unit). Based on semi‐quantitative Raman analysis, low iron content slightly affected the glass network via the 2Q 4 → 2Q 3 + Q 2 speciation path, depolymerizing the network to form more non‐bridging oxygens (Q 3 , Q 2 ) at the expense of Q 4 . Furthermore, statistical analysis was performed comparing the parameters of the PSR and modified PSR model (mPSR) across all datasets. The mPSR—derived a 1 and a 2 parameters had standard errors significantly larger than those of the PSR parameters ( a 1 , a 2 ). The proposed constant P 0 in the mPSR model was statistically insignificant (i.e., well within its standard error) and had a lower t‐ratio overall. Furthermore, the P 0 value derived from mPSR data fitting was found to be inconsistent with the experimental indentation process over the elastic deformation region.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Shi, J., Zheng, Q., Liu, X., & Li, H. (2026). Vickers Microhardness and Raman Spectroscopic Study of Low‐Iron‐Containing Mixed Alkaline Earth Aluminosilicate Glasses. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71447
Vancouver
Shi J, Zheng Q, Liu X, Li H. Vickers Microhardness and Raman Spectroscopic Study of Low‐Iron‐Containing Mixed Alkaline Earth Aluminosilicate Glasses. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71447
BibTeX
@article{Shi2026,
author = {Shi, Jiayi and Zheng, Qiuju and Liu, Xiaoyun and Li, Hong},
title = {Vickers Microhardness and Raman Spectroscopic Study of Low‐Iron‐Containing Mixed Alkaline Earth Aluminosilicate Glasses},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {11},
doi = {10.1111/jace.71447}
}
EUVIMED