EUVIMEDEUVIMED entdecken
Crossref

Aliovalent Solid‐Solution Defect Engineering for Enhanced EMI Shielding in SiC–AlN Composites

Andong Li, Xiangyu Li, Qingqing Dong, Yuxi Meng, Yujun Zhao, Chuanbing Cheng, Chengshun Li, Zhihao Wang, Zhifeng Lu, Yunli Guo, Kangkang Yuan

Journal of the American Ceramic Society · 2026-11 · 109 (11)

DOI: 10.1111/jace.71404 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 07.11.2026. Verfasst von Andong Li und 10 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Gefördert von: Key Technology Research and Development Program of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Defects in SiC ceramics can regulate electronic structure, carrier transport, and dielectric polarization, making them attractive for electromagnetic interference (EMI) shielding. However, densification remains challenging, intrinsic dielectric loss is limited, and the relationship between solid‐solution‐induced structural evolution and shielding performance remains unclear. Herein, dense SiC–AlN composite ceramics were prepared by hot pressing using AlN‐assisted solid‐solution regulation and phenolic resin as an in situ carbon source. XRD and Rietveld refinement revealed AlN‐content‐dependent lattice‐parameter changes consistent with the coexistence of local SiC–AlN solid‐solution regions and residual AlN. XPS, Raman, and EPR analyses indicated changes in local bonding environments, lattice disorder, and defect‐related paramagnetic signals. The optimized SA‐10 specimen achieved a relative density of 98.6% and a maximum total shielding effectiveness (SE T ) of approximately 32 dB at 3.5 mm, compared with approximately 26 dB for the AlN‐free control (SA‐0) and 24 dB for the resin‐free control (SA). At 4.5 mm, the maximum SE T increased to approximately 67 dB. Reflectance, transmittance, and absorptance analyses revealed reflection‐dominated incident‐power partitioning accompanied by strong attenuation of electromagnetic waves entering the ceramic. These results clarify the effects of AlN addition, resin‐derived carbon, and thickness on the shielding performance of SiC–AlN composites.

Förderung

  • Key Technology Research and Development Program of Shandong Province

Zitieren

APA

Li, A., Li, X., Dong, Q., Meng, Y., Zhao, Y., Cheng, C., Li, C., Wang, Z., Lu, Z., Guo, Y., & Yuan, K. (2026). Aliovalent Solid‐Solution Defect Engineering for Enhanced EMI Shielding in SiC–AlN Composites. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71404

Vancouver

Li A, Li X, Dong Q, Meng Y, Zhao Y, Cheng C, et al. Aliovalent Solid‐Solution Defect Engineering for Enhanced EMI Shielding in SiC–AlN Composites. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71404

BibTeX
@article{Li2026,
  author = {Li, Andong and Li, Xiangyu and Dong, Qingqing and Meng, Yuxi and Zhao, Yujun and Cheng, Chuanbing and Li, Chengshun and Wang, Zhihao and Lu, Zhifeng and Guo, Yunli and Yuan, Kangkang},
  title = {Aliovalent Solid‐Solution Defect Engineering for Enhanced EMI Shielding in SiC–AlN Composites},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {11},
  doi = {10.1111/jace.71404}
}
Kostenlos starten →