Direct Ink Writing of Gradient‐Doped Yb:YAG Laser Ceramics From Slurry With Improved Printability
Journal of the American Ceramic Society · 2026-11 · 109 (11)
DOI: 10.1111/jace.71386 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 04.11.2026. Verfasst von Xinyu Li und 4 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Direct ink writing (DIW) has been developed to be an important method for fabricating laser ceramics with a designed gain profile, which aims to address thermal management issues. However, how to prepare the slurry with both good flowability and shape retention was still a challenge. In this work, polyethyleneimine (PEI) was introduced as a flocculant to improve the printability of the DIW slurry. With the addition of 0.12 wt.% PEI‐5000, the storage modulus of the slurry was increased to G' = 14 800 Pa, three times as high as that of the slurry with hydroxyethyl cellulose (HEC). Meanwhile, the lower flow point ( τ f = 108 Pa) was maintained, and the height‐to‐width ratio of the single filament printed by the selected slurry was 0.86. The slurry with PEI‐5000 exhibited good printability, showing a better balance between flowability and shape retention. Using the optimized slurry combined with active mixing, 0–2.5–5.0–2.5–0 at.% Yb:YAG gradient‐doped laser ceramics were successfully fabricated. The in‐line transmittance of the polished ceramics (5.6 mm thickness) was 82.5% at 1100 nm and 77.8% at 400 nm. By pumping with a fiber‐coupled diode laser, a maximum output power of 26.1 W was achieved, corresponding to a slope efficiency of 54%.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Li, X., Ji, H., Yang, Y., Wang, D., & Zhang, J. (2026). Direct Ink Writing of Gradient‐Doped Yb:YAG Laser Ceramics From Slurry With Improved Printability. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71386
Vancouver
Li X, Ji H, Yang Y, Wang D, Zhang J. Direct Ink Writing of Gradient‐Doped Yb:YAG Laser Ceramics From Slurry With Improved Printability. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71386
BibTeX
@article{Li2026,
author = {Li, Xinyu and Ji, Haohao and Yang, Yuhan and Wang, Dewen and Zhang, Jian},
title = {Direct Ink Writing of Gradient‐Doped Yb:YAG Laser Ceramics From Slurry With Improved Printability},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {11},
doi = {10.1111/jace.71386}
}
EUVIMED