EUVIMEDEUVIMED entdecken
Crossref

Decoupling the Formability and Sintering Activity of YBCO Powders for High‐Performance Superconducting Targets

Wenyu Zhang, Xiaokai Liu, Benshuang Sun, Hetao Zhao, Nuo Cheng, Xina Liang, Wenhui Bi, Mingzhen Zhang, Yang Liu, Jilin He

Journal of the American Ceramic Society · 2026-11 · 109 (11)

DOI: 10.1111/jace.71384 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 04.11.2026. Verfasst von Wenyu Zhang und 9 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Zhengzhou University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditionally, ultrafine powders are sought after for their enhanced sintering activity; however, their inadequate formability is frequently neglected. To disentangle these two critical factors, this study conducts a systematic investigation into the sintering behavior of YBCO superconducting targets utilizing powders with markedly different primary particle sizes (640 nm vs. 50 nm) and specific surface areas (1.41 m 2 /g vs. 11.84 m 2 /g). Despite its higher specific surface area, the finer powder demonstrated substantially inferior compaction performance, resulting in a lower apparent density (1.18 g/cm 3 compared to 1.67 g/cm 3 ) and green compact density (3.16 g/cm 3 at 5 MPa vs. 4.08 g/cm 3 for the coarser powder). Through the design of multi‐path molding and sintering experiments, we effectively isolated the individual contributions of formability and sintering activity. Master sintering curve analysis indicated that the poor formability of the fine powder resulted in a higher apparent densification activation energy (338 ± 5.07–418 ± 6.27 kJ/mol) relative to the coarser powder (313 ± 4.70–382 ± 5.73 kJ/mol), thereby obscuring its inherent sintering advantage. As a result, the target fabricated from the coarser powder, characterized by fewer initial defects and higher green density, exhibited superior final properties, including a density of 5.92 ± 0.22 g/cm 3 , a room‐temperature resistivity of 0.89 ± 0.13 mΩ·cm, and a flexural strength of 60.55 ± 0.91 MPa. This study demonstrates that, for YBCO targets, optimizing green body density through balanced powder characteristics is more crucial than merely pursuing ultra‐fine particle size. The findings offer a robust theoretical foundation for the selection of powder and the design of processes for high‐performance YBCO sputtering targets.

Förderung

  • Zhengzhou University

Zitieren

APA

Zhang, W., Liu, X., Sun, B., Zhao, H., Cheng, N., Liang, X., Bi, W., Zhang, M., Liu, Y., & He, J. (2026). Decoupling the Formability and Sintering Activity of YBCO Powders for High‐Performance Superconducting Targets. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71384

Vancouver

Zhang W, Liu X, Sun B, Zhao H, Cheng N, Liang X, et al. Decoupling the Formability and Sintering Activity of YBCO Powders for High‐Performance Superconducting Targets. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71384

BibTeX
@article{Zhang2026,
  author = {Zhang, Wenyu and Liu, Xiaokai and Sun, Benshuang and Zhao, Hetao and Cheng, Nuo and Liang, Xina and Bi, Wenhui and Zhang, Mingzhen and Liu, Yang and He, Jilin},
  title = {Decoupling the Formability and Sintering Activity of YBCO Powders for High‐Performance Superconducting Targets},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {11},
  doi = {10.1111/jace.71384}
}
Kostenlos starten →