Sintering Behavior and Microstructure Analysis of Polycrystalline Monoclinic Zirconia
Journal of the American Ceramic Society · 2026-11 · 109 (11)
DOI: 10.1111/jace.71375 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 30.10.2026. Verfasst von KyungHyeon Yoo und 6 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Japan Society for the Promotion of Science, Ministry of Education, Culture, Sports, Science and Technology.
Abstract (Originalsprache)
Zirconia transforms into different phases depending on the temperature, with the monoclinic phase being thermodynamically stable below approximately 1170°C. However, fabricating a dense m‐phase zirconia polycrystal is challenging due to the elevated temperature required for densification, which inevitably triggers the monoclinic‒tetragonal phase transitions. Upon cooling, the reverse tetragonal‐to‐monoclinic transformation occurs; this is accompanied by significant volume expansion and shear strain that induces crack formation and eventual ceramic fracture. In this study, we successfully fabricated monoclinic zirconia sintered bodies with a high relative density (approximately 92%) by combining cold isostatic pressing with optimal sintering conditions. Then, we investigated the microstructure of the polycrystalline sintered body, focusing on the atomic structures of grain and twin boundaries using atomic‐resolution scanning transmission electron microscopy. Under optimal sintering condition, the sintered body shows a high density of {110} and {100} twins in the grain interiors. These twin structures likely accommodated transformation strain, allowing the compacts to remain intact after sintering.
Förderung
- Japan Society for the Promotion of Science
- Ministry of Education, Culture, Sports, Science and Technology
Zitieren
APA
Yoo, K., Feng, B., Kondo, S., Matsui, K., Tam, J., Shibata, N., & Ikuhara, Y. (2026). Sintering Behavior and Microstructure Analysis of Polycrystalline Monoclinic Zirconia. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71375
Vancouver
Yoo K, Feng B, Kondo S, Matsui K, Tam J, Shibata N, et al. Sintering Behavior and Microstructure Analysis of Polycrystalline Monoclinic Zirconia. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71375
BibTeX
@article{Yoo2026,
author = {Yoo, KyungHyeon and Feng, Bin and Kondo, Shun and Matsui, Koji and Tam, Jason and Shibata, Naoya and Ikuhara, Yuichi},
title = {Sintering Behavior and Microstructure Analysis of Polycrystalline Monoclinic Zirconia},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {11},
doi = {10.1111/jace.71375}
}
EUVIMED