Effect of Surface Modification on In Situ Mechanical Properties of Brazed Joints Between Porous Si 3 N 4 and TiAl Alloys
Journal of the American Ceramic Society · 2026-11 · 109 (11)
DOI: 10.1111/jace.71339 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 17.11.2026. Verfasst von Yixuan Zhao und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Brazing of porous silicon nitride to TiAl alloys is required for radome applications. In this study, high‐performance brazed joints were achieved by forming a densified transparent glass‐phase layer on the surface of porous silicon nitride ceramics. The effects of the densification layer on residual stresses and the mechanical properties of the brazed joints were evaluated using in situ mechanical testing and synchrotron radiation x‐ray diffraction. The results showed that introducing the dense layer effectively relieved residual stresses in the brazed joints, reducing the residual stress on the ceramic side by 21%. Compared with untreated samples, the critical stress and strain energy release rate of the joints with densification layers increased by approximately 46% and 50%, respectively.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhao, Y., Song, X., Chen, Y., Li, J., Li, G., & Feng, J. (2026). Effect of Surface Modification on In Situ Mechanical Properties of Brazed Joints Between Porous Si 3 N 4 and TiAl Alloys. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71339
Vancouver
Zhao Y, Song X, Chen Y, Li J, Li G, Feng J. Effect of Surface Modification on In Situ Mechanical Properties of Brazed Joints Between Porous Si 3 N 4 and TiAl Alloys. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71339
BibTeX
@article{Zhao2026,
author = {Zhao, Yixuan and Song, Xiaoguo and Chen, Yang and Li, Jingcheng and Li, Guangyuan and Feng, Jicai},
title = {Effect of Surface Modification on In Situ Mechanical Properties of Brazed Joints Between Porous Si 3 N 4 and TiAl Alloys},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {11},
doi = {10.1111/jace.71339}
}
EUVIMED