EUVIMEDEUVIMED entdecken
Crossref

Low‐Carbon MgO‐Reinforced Ferronickel Slag Geopolymers: Thermal Performance, Mechanism, and Life‐Cycle Assessment

Xiaozhu Zhang, Tianyi Chen, Xinhang Ma, Zhi‐Yuan Zhang, Jiansong Wu

Journal of the American Ceramic Society · 2026-10 · 109 (10)

DOI: 10.1111/jace.71320 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 16.10.2026. Verfasst von Xiaozhu Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ferronickel‐slag geopolymers (FNS‐G) provide a sintering‐free route to refractory materials, but their service temperature is limited by the thermal instability of alkali aluminosilicate gels and Fe‐bearing, low‐melting phases. Here, dead‐burned MgO (D‐MgO) was used as a temperature‐activated phase regulator to develop MgO‐modified FNS‐G (M‐FNS‐G). A Box–Behnken response‐surface design balanced room‐temperature compressive strength against linear shrinkage. The optimized M‐FNS‐G (15% D‐MgO, 5% activator, and an activator modulus of 1.6) reached a refractoriness of 1510°C and a load‐softening temperature of 1455°C. Temperature‐resolved XRD, TG–FTIR, BSE–EDS, XPS, and MIP analyses revealed a sequential mechanism: dehydration‐induced pore development below 1000°C, solid‐state sintering and Mg‐silicate crystallization at 1000–1200°C, and a densification regime accompanied by rapid shrinkage and localized surface melting above 1200°C. D‐MgO was progressively consumed to form high‐melting forsterite, with the forsterite fraction among the detected crystalline phases reaching 89.56% at 1400°C. The cradle‐to‐gate global warming potential was 414 kg CO 2 ‐eq t −1 , corresponding to 23%–35% of that reported for conventional sintered aluminosilicate refractory bricks, although it exceeded the FNS‐G baseline because of MgO production. These results identify D‐MgO as a temperature‐activated phase‐engineering agent and quantify the performance–carbon trade‐off of this sintering‐free refractory system.

Zitieren

APA

Zhang, X., Chen, T., Ma, X., Zhang, Z., & Wu, J. (2026). Low‐Carbon MgO‐Reinforced Ferronickel Slag Geopolymers: Thermal Performance, Mechanism, and Life‐Cycle Assessment. Journal of the American Ceramic Society, 109(10). https://doi.org/10.1111/jace.71320

Vancouver

Zhang X, Chen T, Ma X, Zhang Z, Wu J. Low‐Carbon MgO‐Reinforced Ferronickel Slag Geopolymers: Thermal Performance, Mechanism, and Life‐Cycle Assessment. Journal of the American Ceramic Society. 2026;109(10). doi:10.1111/jace.71320

BibTeX
@article{Zhang2026,
  author = {Zhang, Xiaozhu and Chen, Tianyi and Ma, Xinhang and Zhang, Zhi‐Yuan and Wu, Jiansong},
  title = {Low‐Carbon MgO‐Reinforced Ferronickel Slag Geopolymers: Thermal Performance, Mechanism, and Life‐Cycle Assessment},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {10},
  doi = {10.1111/jace.71320}
}
Kostenlos starten →