Microstructure Evolution of Multi‐Material‐Jetted Porous Architectures During Ultrafast High‐Temperature Co‐Sintering
Journal of the American Ceramic Society · 2026-10 · 109 (10)
DOI: 10.1111/jace.71316 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 20.10.2026. Verfasst von Amin Hodaei und 10 weiteren Autor:innen. Die Arbeit nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Multi‐material additive manufacturing combined with rapid sintering offers a route to compositionally and microstructurally complex energy ceramic architectures, but the effect of ultrafast thermal profiles on layer retention, phase redistribution, and pore morphology remains insufficiently understood. Here, NiO–YSZ/NiO–GDC was used as an SOFC‐relevant system to investigate the processing–microstructure evolution of multi‐material‐jetted layered ceramic structures during ultrafast high‐temperature co‐sintering under vacuum. Structures were heated to 1300°C at 200°C–800°C/min, with dwell times of 15–60 s. SEM–EDS and XRD/Rietveld refinement were used to assess layer retention, shrinkage, pore morphology, phase redistribution, and near‐surface NiO‐to‐Ni conversion. Among the tested conditions, 400°C/min with a 60 s dwell provided the best processing conditions by better retaining the target compositional layering and avoiding the severe morphological disruption observed under the more extreme UHS conditions. The fracture surface SEM images showed layer‐dependent pore morphology. These results define a processing window for UHS co‐sintering of multi‐material‐jetted layered energy ceramic architectures and provide guidance for future SOFC‐relevant electrode development.
Zitieren
APA
Hodaei, A., Weemaes, L., Luckabauer, M., Gottlieb, L., Weingarten, S., Banerjee, A., Hołyńska, M., Vaneker, T. H., Gibson, I., Giuntini, D., & Jafari, D. (2026). Microstructure Evolution of Multi‐Material‐Jetted Porous Architectures During Ultrafast High‐Temperature Co‐Sintering. Journal of the American Ceramic Society, 109(10). https://doi.org/10.1111/jace.71316
Vancouver
Hodaei A, Weemaes L, Luckabauer M, Gottlieb L, Weingarten S, Banerjee A, et al. Microstructure Evolution of Multi‐Material‐Jetted Porous Architectures During Ultrafast High‐Temperature Co‐Sintering. Journal of the American Ceramic Society. 2026;109(10). doi:10.1111/jace.71316
BibTeX
@article{Hodaei2026,
author = {Hodaei, Amin and Weemaes, Luka and Luckabauer, Martin and Gottlieb, Lisa and Weingarten, Steven and Banerjee, Aayan and Hołyńska, Małgorzata and Vaneker, Tom H. and Gibson, Ian and Giuntini, Diletta and Jafari, Davoud},
title = {Microstructure Evolution of Multi‐Material‐Jetted Porous Architectures During Ultrafast High‐Temperature Co‐Sintering},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {10},
doi = {10.1111/jace.71316}
}
EUVIMED