Plasma Oxidation of Additively Manufactured Monolithic and Multi‐Component Ultra‐High Temperature Carbides
Journal of the American Ceramic Society · 2026-06 · 109 (6)
DOI: 10.1111/jace.70942 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 22.06.2026. Verfasst von Varad Agarwal und 2 weiteren Autor:innen. Die Arbeit nennt 71 Literaturangaben. Gefördert von: Office of Naval Research.
Abstract (Originalsprache)
Ultra‐high temperature ceramics (UHTCs) such as tantalum carbide (TaC) and multi‐component UHTCs (MCUHTCs) offer exceptional stability and oxidation resistance above 2500°C but remain difficult to manufacture into useful shapes using conventional routes. This study demonstrates a direct ink writing (DIW)‐based additive manufacturing (AM) pathway for fabricating high‐density TaC and (TaNbHfTi)C (MCUHTC) components with solid loadings up to 87 wt.% and 91 wt.%, respectively. Green bodies were consolidated via pressureless spark plasma sintering (PSPS) and graphite element‐based vacuum sintering (GVS) at 1900°C. PSPS yielded near‐theoretical densification (≈98%) and complete single‐phase solid‐solutioning in MCUHTC, while GVS resulted in phase segregation and lower densification ∼92%. Plasma‐jet oxidation tests revealed that PSPS‐processed MCUHTC exhibited 43% better oxidation resistance than monolithic TaC samples, forming a thin mixed‐oxide layer (∼75 µm) dominated by Hf 6 Ta 2 O 17 , whereas TaC developed thicker erosive Ta 2 O 5 scales (∼133 µm). The MCUHTC samples from GVS fractured under thermal stress. Nanoindentation confirmed the superior mechanical performance of MCUHTC (hardness ≈ 14.5 ± 3.8 GPa, elastic modulus ≈ 300 ± 42.9 GPa) relative to TaC (≈ 11.7 ± 2.5 GPa, ≈ 251 ± 30.6 GPa). Overall, the results establish DIW combined with PSPS as a viable route to fabricate dense, oxidation‐resistant, multi‐component UHTC carbides for hypersonic, and plasma‐facing applications.
Förderung
- Office of Naval Research
Zitieren
APA
Agarwal, V., Vargas, M. M., & Nisar, A. (2026). Plasma Oxidation of Additively Manufactured Monolithic and Multi‐Component Ultra‐High Temperature Carbides. Journal of the American Ceramic Society, 109(6). https://doi.org/10.1111/jace.70942
Vancouver
Agarwal V, Vargas MM, Nisar A. Plasma Oxidation of Additively Manufactured Monolithic and Multi‐Component Ultra‐High Temperature Carbides. Journal of the American Ceramic Society. 2026;109(6). doi:10.1111/jace.70942
BibTeX
@article{Agarwal2026,
author = {Agarwal, Varad and Vargas, Milton Molina and Nisar, Ambreen},
title = {Plasma Oxidation of Additively Manufactured Monolithic and Multi‐Component Ultra‐High Temperature Carbides},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {6},
doi = {10.1111/jace.70942}
}
EUVIMED