EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Structure‐Informed Design of Float‐Compatible Thin Glass Supported by Data‐Driven Screening

Yekta Ateş Gösterişlioğlu, Banu Arslan, İlkay Sökmen, Miray Çelikbilek Ersundu, Ali Erçin Ersundu

Journal of the American Ceramic Society · 2026-06 · 109 (6)

DOI: 10.1111/jace.70885 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 28.05.2026. Verfasst von Yekta Ateş Gösterişlioğlu und 4 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Motivated by growing demand in electronics, automotive, photovoltaic, and architectural applications, thin‐glass products offer substantial potential for material savings and reduced environmental impact, yet their widespread adoption is limited by mechanical instability and reliance on non‐float manufacturing routes. In this work, we establish a comprehensive framework for the design of mechanically robust thin‐glass compositions compatible with conventional float‐glass production. The approach combines (i) structure‐informed, composition–structure–property‐driven design and (ii) data‐driven screening based on artificial intelligence‐assisted predictive modeling. While the data‐driven approach is used to efficiently explore a broad compositional space and identify candidate glasses with high intrinsic elastic modulus and hardness, the primary optimization of chemical strengthening response and processability is achieved through structure‐informed design. Glass compositions within the SiO 2 –Al 2 O 3 –B 2 O 3 –RO–R′ 2 O system (R = Mg, Ca; R′ = Li, Na, K) were designed to target chemical temperability, mechanical durability, and float‐line processability, and were evaluated through thermal, optical, structural, and mechanical analyses. The optimized compositions achieved stress layer depths up to ∼40 µm after chemical tempering, enabling high mechanical performance at reduced thickness. The best‐performing glasses exhibited a ∼10% increase in fracture load and a ∼25% increase in surface hardness at a thickness of 0.75 mm. When benchmarked against standard 1.6 mm soda–lime–silica glass, this corresponds to a reduced areal weight of 1.85 kg m −2 (∼50% lower mass) and an estimated ∼60% reduction in process‐related CO 2 emissions per square meter, based on reduced material usage within the defined boundary. By integrating data‐driven screening with structure‐informed composition design, this work establishes a scalable pathway for next‐generation thin flat glass development, supporting environmentally sustainable and energy‐efficient glass manufacturing.

Zitieren

APA

Gösterişlioğlu, Y. A., Arslan, B., Sökmen, İ., Ersundu, M. Ç., & Ersundu, A. E. (2026). Structure‐Informed Design of Float‐Compatible Thin Glass Supported by Data‐Driven Screening. Journal of the American Ceramic Society, 109(6). https://doi.org/10.1111/jace.70885

Vancouver

Gösterişlioğlu YA, Arslan B, Sökmen İ, Ersundu MÇ, Ersundu AE. Structure‐Informed Design of Float‐Compatible Thin Glass Supported by Data‐Driven Screening. Journal of the American Ceramic Society. 2026;109(6). doi:10.1111/jace.70885

BibTeX
@article{Gsteriliolu2026,
  author = {Gösterişlioğlu, Yekta Ateş and Arslan, Banu and Sökmen, İlkay and Ersundu, Miray Çelikbilek and Ersundu, Ali Erçin},
  title = {Structure‐Informed Design of Float‐Compatible Thin Glass Supported by Data‐Driven Screening},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {6},
  doi = {10.1111/jace.70885}
}
Kostenlos starten →