Optimization of High‐Temperature Environmental Barrier Coatings for 2700°F SiC/SiC Ceramic Matrix Composites
Journal of the American Ceramic Society · 2026-06 · 109 (6)
DOI: 10.1111/jace.70839 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 31.05.2026. Verfasst von Kang N. Lee und 7 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben.
Abstract (Originalsprache)
The upper use temperature of state‐of‐the‐art environmental barrier coatings (EBCs) is limited by the low melting point of the silicon bond coat (BC) (1414°C). The success of next‐generation ceramic matrix composites (CMCs), targeting a 1482°C use temperature, is contingent upon the development of a new generation of EBCs with a higher temperature BC. NASA recently developed a mullite‐based BC via a slurry process to replace the silicon BC. The NASA high temperature EBC (mullite/hafnon/Yb 2 Si 2 O 7 ) exhibited about 500 h of life at 1427°C in furnace steam cycling (FSC), which is below the 1000 h life goal at 1482°C. A study was undertaken to optimize the high temperature EBC to improve its life in FSC and evaluate its performance in rigs that simulate the gas turbine environment. Two layer mullite/hafnon and the topcoat (TC) were first optimized separately, before being combined as one EBC. The main variable for the mullite/hafnon optimization was the amounts of sintering aids. Sc 2 Si 2 O 7 and HfO 2 were the two TC candidates considered to replace the Yb 2 Si 2 O 7 TC. Key factors that influenced the TC performance were CTE match and chemical compatibility with the underlying layers. This article discusses the oxidation kinetics and phase/microstructural evolution of the optimized EBC in FSC, a natural gas burner rig (NGBR), and a combustion rig (CR).
Zitieren
APA
Lee, K. N., Webster, R. I., Harder, B. J., Presby, M., Puleo, B. J., Stuckner, J., Setlock, J., & Hoffman, L. (2026). Optimization of High‐Temperature Environmental Barrier Coatings for 2700°F SiC/SiC Ceramic Matrix Composites. Journal of the American Ceramic Society, 109(6). https://doi.org/10.1111/jace.70839
Vancouver
Lee KN, Webster RI, Harder BJ, Presby M, Puleo BJ, Stuckner J, et al. Optimization of High‐Temperature Environmental Barrier Coatings for 2700°F SiC/SiC Ceramic Matrix Composites. Journal of the American Ceramic Society. 2026;109(6). doi:10.1111/jace.70839
BibTeX
@article{Lee2026,
author = {Lee, Kang N. and Webster, Rebekah I. and Harder, Bryan J. and Presby, Michael and Puleo, Bernadette J. and Stuckner, Josh and Setlock, John and Hoffman, Leland},
title = {Optimization of High‐Temperature Environmental Barrier Coatings for 2700°F SiC/SiC Ceramic Matrix Composites},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {6},
doi = {10.1111/jace.70839}
}
EUVIMED