EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polymer‐Coated Ceramics Versus Admixed Ceramic‒Polymer Feedstocks for Injection Molding: Rheological and Thermal Analysis

Monem Moktadir, Krishna Sai Aparna Munjuluri, Hassan Soltani, Srimanta Barui, Sundar V. Atre, Devendra Bajaj, Kunal H. Kate

Journal of the American Ceramic Society · 2026-06 · 109 (6)

DOI: 10.1111/jace.70819 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 26.05.2026. Verfasst von Monem Moktadir und 6 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer‐coated ceramic powders (PCCPs) prepared via a thermally induced phase separation (TIPS) process have emerged as a promising alternative for enhancing the processability and mechanical properties of highly filled ceramic polymer compounds. This study investigates the performance of PCCP, specifically alumina particles coated with polybutylene terephthalate (PBT), compared to conventional admix compounds prepared through melt‐mixing. The research explores the viscosity, flowability, packing efficiency, and thermal stability of PCCP at 50 and 60 vol.% solids loadings. The results indicate that PCCP exhibits significantly lower viscosity across all shear rates, with a 54.1% reduction at 1000 s ‒1 compared to admixes at 50% loading, which can help to improve mold filling behavior and reduce processing defects. Additionally, PCCPs demonstrate enhanced powder flowability, as evidenced by a lower Hausner ratio (1.15 for 50% PCCP vs. 1.56 for alumina particles) and high pycnometer density (2.81 g/cm 3 ), suggesting good packing efficiency. At 60% loading, all compounds exhibited significantly increased viscosity, indicating the challenges associated with high solids loading, while PCCP maintained improved rheological performance under these conditions. The findings highlight PCCPs as a better alternative to conventional, ad‐mixed ceramic‒polymer compounds, offering enhanced flow characteristics at industrially relevant shear rates, better packing, and improved thermal behavior, making it a viable option for high‐performance ceramic injection molding applications.

Zitieren

APA

Moktadir, M., Munjuluri, K. S. A., Soltani, H., Barui, S., Atre, S. V., Bajaj, D., & Kate, K. H. (2026). Polymer‐Coated Ceramics Versus Admixed Ceramic‒Polymer Feedstocks for Injection Molding: Rheological and Thermal Analysis. Journal of the American Ceramic Society, 109(6). https://doi.org/10.1111/jace.70819

Vancouver

Moktadir M, Munjuluri KSA, Soltani H, Barui S, Atre SV, Bajaj D, et al. Polymer‐Coated Ceramics Versus Admixed Ceramic‒Polymer Feedstocks for Injection Molding: Rheological and Thermal Analysis. Journal of the American Ceramic Society. 2026;109(6). doi:10.1111/jace.70819

BibTeX
@article{Moktadir2026,
  author = {Moktadir, Monem and Munjuluri, Krishna Sai Aparna and Soltani, Hassan and Barui, Srimanta and Atre, Sundar V. and Bajaj, Devendra and Kate, Kunal H.},
  title = {Polymer‐Coated Ceramics Versus Admixed Ceramic‒Polymer Feedstocks for Injection Molding: Rheological and Thermal Analysis},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {6},
  doi = {10.1111/jace.70819}
}
Kostenlos starten →