EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Low‐Carbon Composite Cement Mortar Incorporating Local Raw Materials as SCMs: Performance and Life Cycle Analysis

Adeolu Adediran, Nana Asaam, Javier Manso‐Morato, Priyadharshini Perumal

Journal of the American Ceramic Society · 2026-04 · 109 (4)

DOI: 10.1111/jace.70717 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 10.04.2026. Verfasst von Adeolu Adediran und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Suomen Kulttuurirahasto.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Performance and life cycle analysis of composite cement mortars developed using local conventional (blast furnace slag and fly ash) and novel non‐conventional (stone wool, glass wool, calcined Finnish clay, volcanic pozzolan Iceland, and ladle slag) raw materials as supplementary cementitious materials (SCMs) was investigated. The SCMs and the prepared mortars were characterized using x‐ray diffraction, FTIR, TG‐DTG, SEM‐EDS, flowability, compressive strength, ultrasonic pulse velocity (UPV), water absorption, permeable porosity, and life cycle analysis (LCA). Experimental results showed a difference in the physical, chemical, and mineralogical composition of the SCMs, which in turn influenced the properties of the composite cement mortars developed. Ladle slag (30 wt.%) as SCM performed better, resulting in mortars with comparable mechanical, UPV, water absorption, permeable porosity, and microstructural properties but lower flowability values compared with reference mortars. In contrast, the use of other SCMs resulted in mortars with slightly lower mechanical properties, increased workability, and higher water absorption and permeable porosity than the reference mortars. The better performance of ladle slag may be attributed to the increased amount of precipitated hydration phases and formation of supplemental pore‐filling hydration products, such as C 3 AH 6 and Al (OH) 3 , attributed to the dissolution and participation of alumina from the SCM in gel formation. LCA results revealed a reduction in the environmental impact of the composite cement mortars (except those containing Finnish clay as SCM) when compared to PC‐based mortars.

Förderung

  • Suomen Kulttuurirahasto

Zitieren

APA

Adediran, A., Asaam, N., Manso‐Morato, J., & Perumal, P. (2026). Low‐Carbon Composite Cement Mortar Incorporating Local Raw Materials as SCMs: Performance and Life Cycle Analysis. Journal of the American Ceramic Society, 109(4). https://doi.org/10.1111/jace.70717

Vancouver

Adediran A, Asaam N, Manso‐Morato J, Perumal P. Low‐Carbon Composite Cement Mortar Incorporating Local Raw Materials as SCMs: Performance and Life Cycle Analysis. Journal of the American Ceramic Society. 2026;109(4). doi:10.1111/jace.70717

BibTeX
@article{Adediran2026,
  author = {Adediran, Adeolu and Asaam, Nana and Manso‐Morato, Javier and Perumal, Priyadharshini},
  title = {Low‐Carbon Composite Cement Mortar Incorporating Local Raw Materials as SCMs: Performance and Life Cycle Analysis},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {4},
  doi = {10.1111/jace.70717}
}
Kostenlos starten →