EUVIMEDEUVIMED entdecken
Crossref

B 2 O 3 ‐Coated Si 3 N 4 Expands the Vat‐Photopolymerization Window and Enables High‐Performance Ceramics

Wei‐Kang Li, Sen Su, Lin Guo, Jia‐Min Wu, Ze‐Yu Deng, Rui‐Zhao Li, Fu‐Lin Zhou, Wen‐Zhong Lu, Xiao‐Feng Zeng, An‐Fu Guo, Zhong‐Liang Lu, Jing‐Xian Zhang und 1 weitere

Journal of the American Ceramic Society · 2026-03 · 109 (3)

DOI: 10.1111/jace.70664 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 18.03.2026. Verfasst von Wei‐Kang Li und 12 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon nitride (Si 3 N 4 ) is attractive for high‐temperature and high‐wear applications, yet vat photopolymerization (VPP) of Si 3 N 4 remains challenging because the powder exhibits a high refractive index and strong absorption near 405 nm, resulting in insufficient cure depth and poor interlayer bonding. This study proposes an aqueous boric‐acid route to form a dehydration‐derived B 2 O 3 surface coating on Si 3 N 4 particles to improve photon utilization during VPP while simultaneously tailoring the transient liquid phase during subsequent sintering. A 30 vol% Si 3 N 4 suspension stabilized by ammonium polyacrylate (PAA–NH 4 ) was modified using four boric acid concentrations, followed by controlled dehydration to obtain coated powders. The coating reduces UV absorbance around 405 nm, and the cure depth increased from 10.51 to 50.93 µm under 20 mW/cm 2 irradiations, enabling stable printing of dense green bodies. After debinding and pressure sintering at 1750°C under 2 MPa N 2 for 2 h, the optimum B 2 O 3 level (∼2.37 wt% in the ceramic powder) delivers 92.22% relative density, 400.19 MPa flexural strength, 7.33 MPa·m 1/2 fracture toughness, 16.44 GPa Vickers hardness, and 34.77 W·m −1 ·K −1 thermal conductivity. The B 2 O 3 surface coating offers a dual lever over light‐curing efficiency and liquid‐phase sintering kinetics, enabling dense Si 3 N 4 with a balanced combination of strength, toughness, hardness, and thermal conductivity. This study provides an effective surface‐modification strategy to expand the process window for VPP‐based additive manufacturing of high‐performance Si 3 N 4 ceramics.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, W., Su, S., Guo, L., Wu, J., Deng, Z., Li, R., Zhou, F., Lu, W., Zeng, X., Guo, A., Lu, Z., Zhang, J., & Shi, Y. (2026). B 2 O 3 ‐Coated Si 3 N 4 Expands the Vat‐Photopolymerization Window and Enables High‐Performance Ceramics. Journal of the American Ceramic Society, 109(3). https://doi.org/10.1111/jace.70664

Vancouver

Li W, Su S, Guo L, Wu J, Deng Z, Li R, et al. B 2 O 3 ‐Coated Si 3 N 4 Expands the Vat‐Photopolymerization Window and Enables High‐Performance Ceramics. Journal of the American Ceramic Society. 2026;109(3). doi:10.1111/jace.70664

BibTeX
@article{Li2026,
  author = {Li, Wei‐Kang and Su, Sen and Guo, Lin and Wu, Jia‐Min and Deng, Ze‐Yu and Li, Rui‐Zhao and Zhou, Fu‐Lin and Lu, Wen‐Zhong and Zeng, Xiao‐Feng and Guo, An‐Fu and Lu, Zhong‐Liang and Zhang, Jing‐Xian and Shi, Yu‐Sheng},
  title = {B 2 O 3 ‐Coated Si 3 N 4 Expands the Vat‐Photopolymerization Window and Enables High‐Performance Ceramics},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {3},
  doi = {10.1111/jace.70664}
}
Kostenlos starten →