EUVIMEDEUVIMED entdecken
Crossref

Thermodynamics‐Guided Design of Glass‐Rich Mullite Refractories With Enhanced Resistance to Molten Na‐Salts Corrosion

Chunfeng Liu, Guoqing Xiao, Cailian Chen, Biqiang Xie, Donghai Ding, Yufeng Xia, Christopher Parr, Christoph Wöhrmeyer

Journal of the American Ceramic Society · 2026-03 · 109 (3)

DOI: 10.1111/jace.70641 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 13.03.2026. Verfasst von Chunfeng Liu und 7 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study employed thermodynamic simulations to elucidate the sodium corrosion mechanisms of the Al 2 O 3 ‐SiO 2 refractories. The simulation predicted that to inhibit the formation of high‐expansion phases such as NaAlO 2 , NaAlSiO 4 , and NaAl 11 O 17 and to promote the generation of a suitable liquid phase with high viscosity, the optimal chemical composition for Al 2 O 3 ‐SiO 2 refractories should be within the range of 50–70 wt.% SiO 2 and 30–50 wt.% Al 2 O 3 . Based on the simulation results, four raw materials, tabular alumina (TA), mullite grade M70, mullite grade M60, and glass‐rich mullite (GRM), were selected to fabricate five castables (CTA, CTACr, CTAM60, CM70, and CGRM). These castables were experimentally evaluated to validate the thermodynamic predictions, with particular emphasis on the corrosion mechanism of CGRM. Sodium corrosion test verified that CGRM, with low Al 2 O 3 content, exhibited superior resistance to alkali penetration compared to the other three castables. The enhanced resistance is attributed to the early formation of a liquid phase at 729°C, resulting from the reaction between the high‐SiO 2 glass phase and Na 2 CO 3 , thereby effectively inhibiting the penetration of molten sodium salts. The extensive in situ generation of a viscous liquid phase acted as a protective barrier, significantly mitigating sodium corrosion and penetration, thereby endowing CGRM with exceptional corrosion resistance in high‐sodium environments.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, C., Xiao, G., Chen, C., Xie, B., Ding, D., Xia, Y., Parr, C., & Wöhrmeyer, C. (2026). Thermodynamics‐Guided Design of Glass‐Rich Mullite Refractories With Enhanced Resistance to Molten Na‐Salts Corrosion. Journal of the American Ceramic Society, 109(3). https://doi.org/10.1111/jace.70641

Vancouver

Liu C, Xiao G, Chen C, Xie B, Ding D, Xia Y, et al. Thermodynamics‐Guided Design of Glass‐Rich Mullite Refractories With Enhanced Resistance to Molten Na‐Salts Corrosion. Journal of the American Ceramic Society. 2026;109(3). doi:10.1111/jace.70641

BibTeX
@article{Liu2026,
  author = {Liu, Chunfeng and Xiao, Guoqing and Chen, Cailian and Xie, Biqiang and Ding, Donghai and Xia, Yufeng and Parr, Christopher and Wöhrmeyer, Christoph},
  title = {Thermodynamics‐Guided Design of Glass‐Rich Mullite Refractories With Enhanced Resistance to Molten Na‐Salts Corrosion},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {3},
  doi = {10.1111/jace.70641}
}
Kostenlos starten →