EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printing Polymer Derived SiC/SiOC(N) Ceramic Matrix Composites From Replica of SiC/Polyurethane Cellular Structures

Rajat Chaudhary, Jochebed Zyambo, Sereno Sacchet, Luca Fambri, Mattia Biesuz, Gian Domenico Sorarù

Journal of the American Ceramic Society · 2026-03 · 109 (3)

DOI: 10.1111/jace.70635 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 07.03.2026. Verfasst von Rajat Chaudhary und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fondazione Cassa Di Risparmio Di Trento E Rovereto.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cellular SiC/thermoplastic polyurethane (TPU) components were printed via fused filament fabrication and impregnated with a commercial polysilazane. The pyrolysis process in an inert atmosphere converts the structure into a ceramic‐matrix composite through the polymer‐derived ceramics (PDCs) route. Eventually, cellular components constituted by an amorphous SiOC(N) matrix with a dispersed SiC phase were obtained. The structural evolution was investigated via infrared spectroscopy, while the microstructure was studied via scanning electron microscopy. Properties like Vickers hardness, skeletal density, and compressive strength have been measured. The results indicate that the process allows the preparation of cellular structures with composite ceramic struts and a homogeneously distributed particulate reinforcing phase. The process opens new opportunities for the 3D‐printing of PDCs as the dispersed phase can tailor the pyrolysis shrinkage, improve the mechanical properties of the component, and, if properly tailored, introduce new functionalities.

Förderung

  • Fondazione Cassa Di Risparmio Di Trento E Rovereto

Zitieren

APA

Chaudhary, R., Zyambo, J., Sacchet, S., Fambri, L., Biesuz, M., & Sorarù, G. D. (2026). 3D Printing Polymer Derived SiC/SiOC(N) Ceramic Matrix Composites From Replica of SiC/Polyurethane Cellular Structures. Journal of the American Ceramic Society, 109(3). https://doi.org/10.1111/jace.70635

Vancouver

Chaudhary R, Zyambo J, Sacchet S, Fambri L, Biesuz M, Sorarù GD. 3D Printing Polymer Derived SiC/SiOC(N) Ceramic Matrix Composites From Replica of SiC/Polyurethane Cellular Structures. Journal of the American Ceramic Society. 2026;109(3). doi:10.1111/jace.70635

BibTeX
@article{Chaudhary2026,
  author = {Chaudhary, Rajat and Zyambo, Jochebed and Sacchet, Sereno and Fambri, Luca and Biesuz, Mattia and Sorarù, Gian Domenico},
  title = {3D Printing Polymer Derived SiC/SiOC(N) Ceramic Matrix Composites From Replica of SiC/Polyurethane Cellular Structures},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {3},
  doi = {10.1111/jace.70635}
}
Kostenlos starten →