Bioinspired design of silicon carbide–aluminum composites with tunable brick‐mortar structures via three‐dimensional printing and pressure infiltration
Journal of the American Ceramic Society · 2025-12 · 108 (12)
DOI: 10.1111/jace.70183 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 22.08.2025. Verfasst von Song Shen und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Overcoming the intrinsic trade‐off between strength and toughness remains a key challenge for metal matrix composites. Inspired by the “brick‐and‐mortar” (BM) architecture of natural nacre, this study presents a tunable structural design strategy that combines vat photopolymerization three‐dimensional printing with pressure‐assisted infiltration to fabricate silicon carbide‐aluminum (SiC–Al) composites with controlled brick aspect ratios and layered configurations. By synergistically regulating the surface oxidation of SiC particles and infiltration temperature, the formation of detrimental Al 4 C 3 phases was effectively suppressed, resulting in a composite interfacial buffer layer composed of amorphous Al 2 O 3 and Al that enhances interfacial bonding and thermal stress accommodation. Mechanical testing and finite element simulations demonstrate that an optimal brick aspect ratio promotes crack deflection and activates plastic energy dissipation in the Al matrix, leading to simultaneous improvements in strength and toughness. Notably, the BM composites exhibited ∼ 12% higher fracture toughness and ∼ 61% greater fracture energy compared to lamellar structures. This work highlights the critical role of structural geometry in achieving strength–toughness synergy, offering a promising approach for the bioinspired design of advanced metal–ceramic composites.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Shen, S., Meng, X., Xu, T., Ma, H., Mo, G., Guo, R., & Shen, P. (2025). Bioinspired design of silicon carbide–aluminum composites with tunable brick‐mortar structures via three‐dimensional printing and pressure infiltration. Journal of the American Ceramic Society, 108(12). https://doi.org/10.1111/jace.70183
Vancouver
Shen S, Meng X, Xu T, Ma H, Mo G, Guo R, et al. Bioinspired design of silicon carbide–aluminum composites with tunable brick‐mortar structures via three‐dimensional printing and pressure infiltration. Journal of the American Ceramic Society. 2025;108(12). doi:10.1111/jace.70183
BibTeX
@article{Shen2025,
author = {Shen, Song and Meng, Xiang‐Yu and Xu, Tian‐Hao and Ma, He and Mo, Guo‐Chao and Guo, Rui‐Fen and Shen, Ping},
title = {Bioinspired design of silicon carbide–aluminum composites with tunable brick‐mortar structures via three‐dimensional printing and pressure infiltration},
journal = {Journal of the American Ceramic Society},
year = {2025},
volume = {108},
number = {12},
doi = {10.1111/jace.70183}
}
EUVIMED