EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Constrained flash sintering of gadolinium‐doped ceria thin layers

Luca Balice, Apurv Dash, Christian Melcher, Doris Sebold, Robert Mücke, Alexander Opitz, Martin Bram, Olivier Guillon

Journal of the American Ceramic Society · 2025-10 · 108 (10)

DOI: 10.1111/jace.70033 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 13.06.2025. Verfasst von Luca Balice und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Austrian Science Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flash sintering is a novel technology, which enables densification of ceramics in seconds to minutes at moderate furnace temperatures. To date, it has mostly been demonstrated on samples with simple geometries like dog bones, bars, or cylinders, which are quite far from real applications. In the present work, we extend flash sintering to gadolinium‐doped ceria (GDC) thin ceramic layers (∼15 × 8 × 0.008 mm 3 ) screen printed onto rigid alumina substrates. Building on our previous work with GDC dog bones, we selected the same material due to its relevance for solid oxide cell applications. All experiments were performed isothermally under voltage‐to‐current control mode. Flash sintering was triggered under relatively high electric fields (> 500 V cm −1 ), current densities (> 600 mA mm −2 ), and furnace temperatures (> 1100°C), as indicated by the characteristic abrupt increase in the specimen's conductivity and bright light emission. However, significant effects of the electric current were observed at a furnace temperature of 1200°C, with current densities above 800 mA mm −2 , and a dwell time of 180 min, leading to relative densities above 90%, compared to only 75% for conventional sintering under the same temperature and time. The harsher conditions needed to flash sinter these specimens are explained by the very high aspect ratio (surface area‐to‐volume) compared to other usual geometries in flash sintering experiments. In addition, the heat dissipation in the special experimental setup plays an important role in terms of energy balance.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Austrian Science Fund

Zitieren

APA

Balice, L., Dash, A., Melcher, C., Sebold, D., Mücke, R., Opitz, A., Bram, M., & Guillon, O. (2025). Constrained flash sintering of gadolinium‐doped ceria thin layers. Journal of the American Ceramic Society, 108(10). https://doi.org/10.1111/jace.70033

Vancouver

Balice L, Dash A, Melcher C, Sebold D, Mücke R, Opitz A, et al. Constrained flash sintering of gadolinium‐doped ceria thin layers. Journal of the American Ceramic Society. 2025;108(10). doi:10.1111/jace.70033

BibTeX
@article{Balice2025,
  author = {Balice, Luca and Dash, Apurv and Melcher, Christian and Sebold, Doris and Mücke, Robert and Opitz, Alexander and Bram, Martin and Guillon, Olivier},
  title = {Constrained flash sintering of gadolinium‐doped ceria thin layers},
  journal = {Journal of the American Ceramic Society},
  year = {2025},
  volume = {108},
  number = {10},
  doi = {10.1111/jace.70033}
}
Kostenlos starten →