EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Concentrated salt water can partially replace sodium hydroxide in alkali activation of blast furnace slag

Sima Kamali, Minna Patanen, Juho Yliniemi, Katja Kilpimaa, Tero Luukkonen

Journal of the American Ceramic Society · 2025-08 · 108 (8)

DOI: 10.1111/jace.20596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 21.04.2025. Verfasst von Sima Kamali und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Council of Finland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Alkali‐activated materials are low‐CO 2 alternative binders, but the alkali‐activator component contributes significantly to the CO 2 emissions, costs, and safety risks. This study explores the potential of partially replacing NaOH with highly concentrated salt waters as an activator for blast furnace slag and related chemical mechanisms. Four water types were compared: simulated brine (∼105‰ salinity), NaCl and Na 2 SO 4 solutions, and deionized water. Results show that NaOH molarity can be reduced to 0.1 mol/L (or 0.16 weight% NaOH of slag weight—a significantly lower value than typically required) using simulated brine, while achieving a 28‐day compressive strength of 28.0 MPa—more than double compared to deionized water. Slag dissolution increased substantially upon using salt waters with 0.1 mol/L NaOH in comparison to deionized water. Thermodynamic modeling and slag dissolution studies indicated that salt anions (e.g., SO 4 2− and Cl − ) formed ion‐pair complexes with Ca and Mg, and thus drove the enhanced slag dissolution. The similar likely occurs also when using Na 2 SO 4 as an alkali activator for which the mechanism has been unclear in the existing literature. From the practical point of view, the highly concentrated salt waters could largely replace NaOH in certain applications of alkali‐activated slags when no steel reinforcements are required.

Förderung

  • Research Council of Finland

Zitieren

APA

Kamali, S., Patanen, M., Yliniemi, J., Kilpimaa, K., & Luukkonen, T. (2025). Concentrated salt water can partially replace sodium hydroxide in alkali activation of blast furnace slag. Journal of the American Ceramic Society, 108(8). https://doi.org/10.1111/jace.20596

Vancouver

Kamali S, Patanen M, Yliniemi J, Kilpimaa K, Luukkonen T. Concentrated salt water can partially replace sodium hydroxide in alkali activation of blast furnace slag. Journal of the American Ceramic Society. 2025;108(8). doi:10.1111/jace.20596

BibTeX
@article{Kamali2025,
  author = {Kamali, Sima and Patanen, Minna and Yliniemi, Juho and Kilpimaa, Katja and Luukkonen, Tero},
  title = {Concentrated salt water can partially replace sodium hydroxide in alkali activation of blast furnace slag},
  journal = {Journal of the American Ceramic Society},
  year = {2025},
  volume = {108},
  number = {8},
  doi = {10.1111/jace.20596}
}
Kostenlos starten →