EUVIMEDEUVIMED entdecken
Crossref

Pressureless sintering and properties of additively manufactured ZrB 2 –SiC

Marharyta Lakusta, Nicholas M. Timme, Jeremy L. Watts, William G. Fahrenholtz, Gregory E. Hilmas, David W. Lipke

Journal of the American Ceramic Society · 2025-03 · 108 (3)

DOI: 10.1111/jace.20250 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 15.11.2024. Verfasst von Marharyta Lakusta und 5 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Densification behavior, grain growth kinetics, mechanical and thermal properties of pressurelessly sintered zirconium diboride–silicon carbide (ZrB 2 –SiC) fabricated by extrusion of high solids loading pastes have been studied. The effects of sintering temperature (1600–2300°C), heating rate during constant heating rate sintering (10–50°C/min), and time during isothermal sintering (3–24 h) on density and grain size were examined. The apparent activation energy for densification was determined to be 940 ± 90 kJ/mol, suggesting lattice diffusion as the dominant sintering mechanism. Grain growth of both ZrB 2 and SiC followed a normal grain growth power law with grain growth exponent n = 2 indicating diffusion‐controlled coarsening. The activation energies for grain growth were 267 ± 10 kJ/mol for ZrB 2 and 264 ± 15 kJ/mol for SiC. Sintered microstructures were homogeneous with relative densities of 95%–99% depending on heat treatment schedules. Flexural strength (270 ± 40 MPa) was lower than hot‐pressed materials of equivalent composition by a factor of two or more due to the presence of pores originating from paste inhomogeneities. Young's modulus (482 ± 20 GPa) and Vicker's microhardness (22 ± 5 MPa HV0.2), as well as thermal diffusivity and thermal conductivity up to 1800°C were found to be comparable to hot‐pressed materials.

Zitieren

APA

Lakusta, M., Timme, N. M., Watts, J. L., Fahrenholtz, W. G., Hilmas, G. E., & Lipke, D. W. (2025). Pressureless sintering and properties of additively manufactured ZrB 2 –SiC. Journal of the American Ceramic Society, 108(3). https://doi.org/10.1111/jace.20250

Vancouver

Lakusta M, Timme NM, Watts JL, Fahrenholtz WG, Hilmas GE, Lipke DW. Pressureless sintering and properties of additively manufactured ZrB 2 –SiC. Journal of the American Ceramic Society. 2025;108(3). doi:10.1111/jace.20250

BibTeX
@article{Lakusta2025,
  author = {Lakusta, Marharyta and Timme, Nicholas M. and Watts, Jeremy L. and Fahrenholtz, William G. and Hilmas, Gregory E. and Lipke, David W.},
  title = {Pressureless sintering and properties of additively manufactured ZrB 2 –SiC},
  journal = {Journal of the American Ceramic Society},
  year = {2025},
  volume = {108},
  number = {3},
  doi = {10.1111/jace.20250}
}
Kostenlos starten →