EUVIMEDEUVIMED entdecken
Crossref

High‐entropy (Ti 0.2 V 0.2 Nb 0.2 Mo 0.2 W 0.2 )Si 2 with excellent high‐temperature wear resistance

Jicheng Li, Shuna Chen, Hengzhong Fan, Qiangqiang Zhang, Yunfeng Su, Junjie Song, Litian Hu, Yanchun Zhou, Yongsheng Zhang

Journal of the American Ceramic Society · 2024-04 · 107 (4) · 2750-2764

DOI: 10.1111/jace.19592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 06.12.2023. Verfasst von Jicheng Li und 8 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 84 Literaturangaben. Gefördert von: National Key Research and Development Program of China, West Light Foundation, Chinese Academy of Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The oxidation products (MoO 3 and V 2 O 5 ) have low melting points and tend to sublimate at high temperatures despite that MoSi 2 and VSi 2 may possess good self‐lubricating properties. To cope with this challenge, a high‐entropy transition metal disilicide was designed in this work in which transition metal elements that could form high melting point oxides were deliberately added. The high‐entropy (Ti 0.2 V 0.2 Nb 0.2 Mo 0.2 W 0.2 )Si 2 (HE‐MSi 2 ) with hexagonal structure was successfully prepared by SPS using Ti, V, Nb, Mo, W, and Si powders as the initial materials in this work. The HE‐MSi 2 presents a high hardness (11.8 ± 0.4 GPa) and elastic modulus (387.2 ± 46.8 GPa). In particular, its hardness is higher than that of the corresponding disilicides. Noteworthy, HE‐MSi 2 demonstrated superior wear resistance when compared to Mo‐Si‐based ceramics (such as MoSi 2 , Mo 5 Si 3 , and Mo 5 SiB 2 ), high‐entropy carbides (such as (MoTaWVTi)C, (HfMoNbTaTi)C, and (TiVNbMoW) 4.375 , and traditional single‐phase ceramics (including Sialon, Si 3 N 4 , Al 2 O 3 , SiC, and ZrO 2 ). Meanwhile, at a high temperature of 600°C, the friction coefficient and wear rate were reduced to 0.64 ± 0.05 and (1.88 ± 0.15)×10 6 mm 3 /N·m, respectively. The preferential oxidation of different elements of the HE‐MSi 2 was validated through systematical characterization of composition evolution, which was dominantly impacted by high temperature and friction induction.

Förderung

  • National Key Research and Development Program of China
  • West Light Foundation, Chinese Academy of Sciences

Zitieren

APA

Li, J., Chen, S., Fan, H., Zhang, Q., Su, Y., Song, J., Hu, L., Zhou, Y., & Zhang, Y. (2024). High‐entropy (Ti 0.2 V 0.2 Nb 0.2 Mo 0.2 W 0.2 )Si 2 with excellent high‐temperature wear resistance. Journal of the American Ceramic Society, 107(4), 2750-2764. https://doi.org/10.1111/jace.19592

Vancouver

Li J, Chen S, Fan H, Zhang Q, Su Y, Song J, et al. High‐entropy (Ti 0.2 V 0.2 Nb 0.2 Mo 0.2 W 0.2 )Si 2 with excellent high‐temperature wear resistance. Journal of the American Ceramic Society. 2024;107(4):2750-2764. doi:10.1111/jace.19592

BibTeX
@article{Li2024,
  author = {Li, Jicheng and Chen, Shuna and Fan, Hengzhong and Zhang, Qiangqiang and Su, Yunfeng and Song, Junjie and Hu, Litian and Zhou, Yanchun and Zhang, Yongsheng},
  title = {High‐entropy (Ti 0.2 V 0.2 Nb 0.2 Mo 0.2 W 0.2 )Si 2 with excellent high‐temperature wear resistance},
  journal = {Journal of the American Ceramic Society},
  year = {2024},
  volume = {107},
  number = {4},
  pages = {2750--2764},
  doi = {10.1111/jace.19592}
}
Kostenlos starten →