EUVIMEDEUVIMED entdecken
Crossref

Enhancing cutting performance of Ti(C,N)‐based cermet tools on nodular cast iron by incorporating high‐entropy carbide

Yi Zhou, Run‐Ping Liu, Zhen‐Yong Lao, Si‐Chun Luo, Yang You, Shi‐Kuan Sun, Wei‐Ming Guo, Hua‐Tay Lin

Journal of the American Ceramic Society · 2023-11 · 106 (11) · 6987-6994

DOI: 10.1111/jace.19314 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 12.07.2023. Verfasst von Yi Zhou und 7 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we investigated the cutting performance and wear mechanisms of Ti(C,N)‐based cutting tools containing varying weight percentages (0%, 5%, 10%, and 15%) of high‐entropy carbide (HEC) (V 0.2 Nb 0.2 Mo 0.2 Ta 0.2 W 0.2 )C phase, when used for turning nodular cast iron. According to the turning test results, the cermet cutting tools containing 0 wt%, 5 wt%, 10 wt%, and 15 wt% HEC phases demonstrated effective cutting lives of 402, 720, 632, and 465 s, respectively. The tool with 5 wt% HEC phase showed the best cutting performance. When cutting nodular cast iron with cermet cutting tools, the main wear mechanisms observed were diffusion, oxidation, adhesion, and abrasion on the flank surface, along with diffusion, oxidation, and abrasion on the rake surface. The results of this study indicated that (V 0.2 Nb 0.2 Mo 0.2 Ta 0.2 W 0.2 )C could be adopted as an effective reinforced phase in the cermet cutting tools.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhou, Y., Liu, R., Lao, Z., Luo, S., You, Y., Sun, S., Guo, W., & Lin, H. (2023). Enhancing cutting performance of Ti(C,N)‐based cermet tools on nodular cast iron by incorporating high‐entropy carbide. Journal of the American Ceramic Society, 106(11), 6987-6994. https://doi.org/10.1111/jace.19314

Vancouver

Zhou Y, Liu R, Lao Z, Luo S, You Y, Sun S, et al. Enhancing cutting performance of Ti(C,N)‐based cermet tools on nodular cast iron by incorporating high‐entropy carbide. Journal of the American Ceramic Society. 2023;106(11):6987-6994. doi:10.1111/jace.19314

BibTeX
@article{Zhou2023,
  author = {Zhou, Yi and Liu, Run‐Ping and Lao, Zhen‐Yong and Luo, Si‐Chun and You, Yang and Sun, Shi‐Kuan and Guo, Wei‐Ming and Lin, Hua‐Tay},
  title = {Enhancing cutting performance of Ti(C,N)‐based cermet tools on nodular cast iron by incorporating high‐entropy carbide},
  journal = {Journal of the American Ceramic Society},
  year = {2023},
  volume = {106},
  number = {11},
  pages = {6987--6994},
  doi = {10.1111/jace.19314}
}
Kostenlos starten →