Electrical resistivity and flexural strength of mullite‐bonded porous SiC: Effect of transition metal additives
Journal of the American Ceramic Society · 2023-12 · 106 (12) · 7251-7263
DOI: 10.1111/jace.19236 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 13.06.2023. Verfasst von Muhammad Shoaib Anwar und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Korea Institute of Materials Science.
Abstract (Originalsprache)
The influence of various transition metal (Mo, Co, Ni, and Fe) additives on the electrical and mechanical properties of mullite‐strengthened SiC sintered in the range of 1100–1500°C under an Ar atmosphere was investigated. Kaolin was added as a low‐temperature sintering aid in the designed formulations. The addition of metal additives reduced the electrical resistivity, enhanced the mechanical strength, and produced samples with an approximately 40% porosity. The decrease in electrical resistivity was attributed to the in situ formation of electrically conductive metal silicides, whereas the conversion of kaolin to mullite enhanced the mechanical properties. The comparative study shows that at the same metal‐additive content (15 wt%), Fe was the most effective element to reduce the electrical resistivity and increase the flexural strength, which were recorded as 8.0 × 10 0 Ω cm and 20 ± 2 MPa, respectively, of the samples sintered at merely 1300°C.
Förderung
- Korea Institute of Materials Science
Zitieren
APA
Anwar, M. S., Lee, H. J., Ha, J., Lee, J., & Song, I. (2023). Electrical resistivity and flexural strength of mullite‐bonded porous SiC: Effect of transition metal additives. Journal of the American Ceramic Society, 106(12), 7251-7263. https://doi.org/10.1111/jace.19236
Vancouver
Anwar MS, Lee HJ, Ha J, Lee J, Song I. Electrical resistivity and flexural strength of mullite‐bonded porous SiC: Effect of transition metal additives. Journal of the American Ceramic Society. 2023;106(12):7251-7263. doi:10.1111/jace.19236
BibTeX
@article{Anwar2023,
author = {Anwar, Muhammad Shoaib and Lee, Hong Joo and Ha, Jang‐Hoon and Lee, Jongman and Song, In‐Hyuck},
title = {Electrical resistivity and flexural strength of mullite‐bonded porous SiC: Effect of transition metal additives},
journal = {Journal of the American Ceramic Society},
year = {2023},
volume = {106},
number = {12},
pages = {7251--7263},
doi = {10.1111/jace.19236}
}
EUVIMED