EUVIMEDEUVIMED entdecken
Crossref

Investigation of sintering mechanism for novel composite structural thermal barrier coating

Ting Yang, Weize Wang, Jibo Huang, Yangguang Liu, Kaibin Li, Zining Yang, Yihao Wang, Baohan Yuan, Chengcheng Zhang

Journal of the American Ceramic Society · 2023-09 · 106 (9) · 5541-5558

DOI: 10.1111/jace.19164 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 10.05.2023. Verfasst von Ting Yang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A micro‐agglomerated particle embedded–thermal barrier coating (TBC) structure was prepared by an improved plasma spray process to withstand the sintering‐induced degradation of TBCs during service. In this study, the sintering resistance and thermophysical and mechanical properties of conventional and novel‐structured TBCs were systematically characterized. The results suggested that the thermal conductivity and sintering shrinkage of the novel‐structured TBCs were approximately 30% lower than those of conventional air plasma spraying TBCs. The elastic modulus of the novel‐structured coating is only 32% of that of the conventional structure after thermal exposure at 1300°C for 100 h. The distinct structure of the coating is the main factor that influences its performance. The relationship between the structural evolution and residual strain of the coating was analyzed using electron backscatter diffraction and transmission electron microscopy. Significant differences were observed in the sintering behavior of the dense matrix and embedded particle regions in the coating. Some columnar grains near the intersplat pores in the dense matrix have similar lattice orientations, and they tend to connect and consequently heal the intersplat pores. The large pores between the agglomerated particles and non‐oriented submicron‐sized grains that constitute these particles are responsible for the sintering resistance of the coating.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yang, T., Wang, W., Huang, J., Liu, Y., Li, K., Yang, Z., Wang, Y., Yuan, B., & Zhang, C. (2023). Investigation of sintering mechanism for novel composite structural thermal barrier coating. Journal of the American Ceramic Society, 106(9), 5541-5558. https://doi.org/10.1111/jace.19164

Vancouver

Yang T, Wang W, Huang J, Liu Y, Li K, Yang Z, et al. Investigation of sintering mechanism for novel composite structural thermal barrier coating. Journal of the American Ceramic Society. 2023;106(9):5541-5558. doi:10.1111/jace.19164

BibTeX
@article{Yang2023,
  author = {Yang, Ting and Wang, Weize and Huang, Jibo and Liu, Yangguang and Li, Kaibin and Yang, Zining and Wang, Yihao and Yuan, Baohan and Zhang, Chengcheng},
  title = {Investigation of sintering mechanism for novel composite structural thermal barrier coating},
  journal = {Journal of the American Ceramic Society},
  year = {2023},
  volume = {106},
  number = {9},
  pages = {5541--5558},
  doi = {10.1111/jace.19164}
}
Kostenlos starten →