EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Cracking during freeze‐drying in dense freeze cast ceramics: Role of drying rate

Samuel Pinches, George V. Franks

Journal of the American Ceramic Society · 2023-09 · 106 (9) · 5167-5177

DOI: 10.1111/jace.19149 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 04.05.2023. Verfasst von Samuel Pinches und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cracks can form during the freeze‐drying of freeze cast ceramic suspensions while attempting to produce dense ceramics. The suspensions contain alumina particles dispersed in cyclohexane. The rate of drying is controlled by the pressure and temperature during drying (slow drying at atmospheric pressure and −15°C and fast drying under vacuum while the temperature slowly increases from −80°C to room temperature). X‐Ray micro‐computed tomography was used to characterize internal crack formation. Cracks were found to occur during freeze‐drying rather than during freezing. Both slow and fast drying produced cracks, although two different morphologies were observed. Mechanistic models are proposed for the formation of both types of cracks. The rate of freezing was found to influence the formation of cracks. Slow freezing tended to reduce the formation of drying cracks because the slower freezing produced a more heterogeneous distribution of particles and porous regions, which tends to allow stress to be relieved by opening up existing pores rather than forming cracks in the more homogeneous fast frozen bodies.

Zitieren

APA

Pinches, S., & Franks, G. V. (2023). Cracking during freeze‐drying in dense freeze cast ceramics: Role of drying rate. Journal of the American Ceramic Society, 106(9), 5167-5177. https://doi.org/10.1111/jace.19149

Vancouver

Pinches S, Franks GV. Cracking during freeze‐drying in dense freeze cast ceramics: Role of drying rate. Journal of the American Ceramic Society. 2023;106(9):5167-5177. doi:10.1111/jace.19149

BibTeX
@article{Pinches2023,
  author = {Pinches, Samuel and Franks, George V.},
  title = {Cracking during freeze‐drying in dense freeze cast ceramics: Role of drying rate},
  journal = {Journal of the American Ceramic Society},
  year = {2023},
  volume = {106},
  number = {9},
  pages = {5167--5177},
  doi = {10.1111/jace.19149}
}
Kostenlos starten →