Moisture‐Responsive Thermal Conductivity Properties of Hydrofiber Versus Polyurethane Foam: Implications for Pressure Injury Prevention
International Wound Journal · 2026
DOI: 10.1111/iwj.70849 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift International Wound Journal, 2026. Verfasst von Amit Gefen und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Biomedical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv, Israel. Hauptthemen laut MEDLINE: Thermal Conductivity, Bandages, Polyurethanes, Pressure Ulcer. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: ConvaTec.
Themen: Dekubitus
Abstract (Originalsprache)
Effective thermal management at the skin‐dressing interface is essential in pressure injury prevention by means of prophylactic dressings. This study quantified the thermal conductivity of AQUACEL Hydrofiber Technology (AHT, hydrofiber) and polyurethane foam dressing materials under normothermic (32°C) and febrile (40°C) conditions across increasing moisture levels. Using a validated custom heat‐flow meter system, dry hydrofiber exhibited significantly greater thermal conductivity than the polyurethane foam (0.43 ± 0.01 vs. 0.20 ± 0.01 W/m K at 32°C; p < 0.001). Upon hydration at 32°C, thermal conductivity values increased nonlinearly for both materials but to a much greater extent for the hydrofiber. At 15% moisture, the hydrofiber reached 4.73 ± 0.12 W/m K compared to the polyurethane foam at 1.03 ± 0.02 W/m K. At 40°C, hydrofiber achieved 3.39 ± 0.19 W/m K with only 10% moisture, indicating a temperature‐responsive biphasic transformation. Overall, hydrofiber demonstrated a fivefold greater thermal conductivity response to moisture than the polyurethane foam. These findings highlight critical, material‐dependent differences in heat dissipation under clinically relevant conditions. The superior moisture‐responsive thermal conductivity of hydrofiber highlights its potential to improve heat dissipation at the skin‐dressing interface under clinically relevant conditions and thereby mitigate local heat accumulation, contributing to skin protection. Thermal conductivity and thermal adaptability studies should be integrated into dressing efficacy research and be used for selection criteria for pressure injury prevention programs alongside mechanical and absorptive performance.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Biomedical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv, Israel.
- Skin Integrity Research Group (SKINT), University Centre for Nursing and Midwifery, Department of Public Health and Primary Care, Ghent University, Ghent, Belgium.
- Department of Mathematics and Statistics and the Data Science Institute, Faculty of Sciences, Hasselt University, Hasselt, Belgium.
- Convatec Technology Centre, ConvaTec Limited, UK.
ORCID-Profile: Amit Gefen
Förderung
- ConvaTec
Zitieren
APA
Gefen, A., Fisk, J., Bunker, J., & Bagshaw, L. E. (2026). Moisture‐Responsive Thermal Conductivity Properties of Hydrofiber Versus Polyurethane Foam: Implications for Pressure Injury Prevention. International Wound Journal. https://doi.org/10.1111/iwj.70849
Vancouver
Gefen A, Fisk J, Bunker J, Bagshaw LE. Moisture‐Responsive Thermal Conductivity Properties of Hydrofiber Versus Polyurethane Foam: Implications for Pressure Injury Prevention. International Wound Journal. 2026. doi:10.1111/iwj.70849
BibTeX
@article{Gefen2026,
author = {Gefen, Amit and Fisk, Jordan and Bunker, Jordyn and Bagshaw, Lauren Elizabeth},
title = {Moisture‐Responsive Thermal Conductivity Properties of Hydrofiber Versus Polyurethane Foam: Implications for Pressure Injury Prevention},
journal = {International Wound Journal},
year = {2026},
doi = {10.1111/iwj.70849}
}
EUVIMED