EUVIMEDEUVIMED entdecken
Crossref

Mechanical Properties of Porous SiC f /SiC Composites Modified With Epoxy Resin and Pyrolytic Carbon at 300–700°C

Tianru Guan, Fei Wang, Hao Qin, Huaixun Liu, Zhaofeng Chen, Lixia Yang

International Journal of Applied Ceramic Technology · 2026-12 · 23 (6)

DOI: 10.1111/ijac.70315 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 13.11.2026. Verfasst von Tianru Guan und 5 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous SiC f /SiC composites were modified by epoxy resin infiltration (SiC f /SiC‐EP) and phenolic resin infiltration followed by pyrolysis (SiC f /SiC‐PyC). Their physical properties, thermal degradation behavior, microstructure, and flexural performance were investigated after oxidation at 300–700°C. The untreated SiC f /SiC‐EP composite exhibited a flexural strength of 1013.07 MPa, which decreased to 657.15 MPa at 400°C and 182.23 MPa at 700°C. This deterioration was associated with epoxy degradation, increased pore connectivity, and reduced matrix continuity. In contrast, SiC f /SiC‐PyC exhibited a nonmonotonic response, with strength decreasing from 440.42 MPa to 165.90 MPa at 400°C, recovering to 395.27 MPa at 500°C, and declining to 138.55 MPa at 700°C. The temporary recovery coincided with increased fiber pull‐out and a more tortuous fracture morphology, suggesting changes in crack–interface interactions. Localized carbon oxidation and residual‐stress relaxation may contribute, although their roles remain unverified. TG–DTG analysis revealed mass losses of approximately 12% and 5% for SiC f /SiC‐EP and SiC f /SiC‐PyC composites, respectively, while XRD detected no new crystalline phases. These findings link mechanical degradation to pore and interfacial evolution.

Zitieren

APA

Guan, T., Wang, F., Qin, H., Liu, H., Chen, Z., & Yang, L. (2026). Mechanical Properties of Porous SiC f /SiC Composites Modified With Epoxy Resin and Pyrolytic Carbon at 300–700°C. International Journal of Applied Ceramic Technology, 23(6). https://doi.org/10.1111/ijac.70315

Vancouver

Guan T, Wang F, Qin H, Liu H, Chen Z, Yang L. Mechanical Properties of Porous SiC f /SiC Composites Modified With Epoxy Resin and Pyrolytic Carbon at 300–700°C. International Journal of Applied Ceramic Technology. 2026;23(6). doi:10.1111/ijac.70315

BibTeX
@article{Guan2026,
  author = {Guan, Tianru and Wang, Fei and Qin, Hao and Liu, Huaixun and Chen, Zhaofeng and Yang, Lixia},
  title = {Mechanical Properties of Porous SiC f /SiC Composites Modified With Epoxy Resin and Pyrolytic Carbon at 300–700°C},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2026},
  volume = {23},
  number = {6},
  doi = {10.1111/ijac.70315}
}
Kostenlos starten →