EUVIMEDEUVIMED entdecken
Crossref

Cold‐Sintering Pretreatment for Energy‐Efficient Densification of 3YSZ via Macropore‐to‐Mesopore Transformation

Jabaseelan P., Bhartendu Kumar, Santanu Mandal, Prathap Kumar, Dinesh Kumar Kotnees, Tamoghna Chakrabarti

International Journal of Applied Ceramic Technology · 2026-12 · 23 (6)

DOI: 10.1111/ijac.70308 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 03.11.2026. Verfasst von Jabaseelan P. und 5 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Yttria‐stabilized zirconia ceramic (3YSZ) was densified to only 60% relative density (RD) by cold‐sintering process (500 MPa pressure, 180°C temperature) but yielded majority of the pores in nano‐scale range. In contrast, 3YSZ conventionally sintered at low temperature of 1200°C yields a high RD of ∼97% with large macro pores ∼2 µm size. To explore further, cold sintering was done as a pretreatment followed by conventional low‐temperature sintering at 1200°C. This method yielded exceptional properties with a majority of tetragonal phases and a complete densification with a remarkably minimal pore size of ∼0.01 µm having Vickers hardness of 12.6 ± 0.3 GPa and flexural strength of 450 ± 40 MPa. The ceramic specimens obtained by combined cold and conventional sintering (CS) were thoroughly characterized using mercury porosimetry, x‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Raman, confocal Raman, impedance spectroscopy, and AFM. The evolution of pore size during the combined cold and CS stages closely mirrors the behavior seen in the well‐known two‐step sintering process. The combined cold and CS process provides an energy‐efficient two‐step sintering route for densification of micron‐sized 3YSZ ceramics, which are important in ceramic industry from a sustainability point of view.

Zitieren

APA

P., J., Kumar, B., Mandal, S., Kumar, P., Kotnees, D. K., & Chakrabarti, T. (2026). Cold‐Sintering Pretreatment for Energy‐Efficient Densification of 3YSZ via Macropore‐to‐Mesopore Transformation. International Journal of Applied Ceramic Technology, 23(6). https://doi.org/10.1111/ijac.70308

Vancouver

P. J, Kumar B, Mandal S, Kumar P, Kotnees DK, Chakrabarti T. Cold‐Sintering Pretreatment for Energy‐Efficient Densification of 3YSZ via Macropore‐to‐Mesopore Transformation. International Journal of Applied Ceramic Technology. 2026;23(6). doi:10.1111/ijac.70308

BibTeX
@article{P2026,
  author = {P., Jabaseelan and Kumar, Bhartendu and Mandal, Santanu and Kumar, Prathap and Kotnees, Dinesh Kumar and Chakrabarti, Tamoghna},
  title = {Cold‐Sintering Pretreatment for Energy‐Efficient Densification of 3YSZ via Macropore‐to‐Mesopore Transformation},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2026},
  volume = {23},
  number = {6},
  doi = {10.1111/ijac.70308}
}
Kostenlos starten →