EUVIMEDEUVIMED entdecken
Crossref

Microstructure and mechanical properties of Al 2 O 3 ceramic and copper joints brazed with AgCuInTi brazing alloy

Botao Li, Ben Liu, Yong Wang, Ruoqi Hu, Ying Wang, Zhenwen Yang

International Journal of Applied Ceramic Technology · 2024-11 · 21 (6) · 4228-4240

DOI: 10.1111/ijac.14828 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 22.06.2024. Verfasst von Botao Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Natural Science Foundation of Tianjin Municipality.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reliable metallurgical bonding between Al 2 O 3 ceramic and copper was achieved by vacuum brazing using Ag–23Cu–14.5In–3.3Ti (wt.%) alloy. The representative interfacial structure of the joint was Al 2 O 3 /Ti 3 (Cu,Al) 3 O + γ‐TiO/Ag‐based solid solution + (Cu,Ag) 7 In 3 + Ag–Cu eutectic + Cu‐based solid solution/copper. The interface microstructure evolved with process parameters, including the formation of γ‐TiO and Ti 3 (Cu,Al) 3 O, as evidenced by microstructural analysis and etched surface morphology. The relationship between fracture path and shear strength was established by observing the fracture morphology and performing shear strength tests on joints with various process parameters, utilizing the degree of the Ag‐based solid solution loss and the thickness of the reaction layer as evaluative factors. When brazed at 760 or 780°C for 20 min using a 100 µm brazing alloy foil, the brazed joints demonstrated a peak shear strength of 215 ± 25 MPa, and the fracture predominantly occurred in the Al 2 O 3 matrix and Ti 3 (Cu,Al) 3 O layer.

Förderung

  • Natural Science Foundation of Tianjin Municipality

Zitieren

APA

Li, B., Liu, B., Wang, Y., Hu, R., Wang, Y., & Yang, Z. (2024). Microstructure and mechanical properties of Al 2 O 3 ceramic and copper joints brazed with AgCuInTi brazing alloy. International Journal of Applied Ceramic Technology, 21(6), 4228-4240. https://doi.org/10.1111/ijac.14828

Vancouver

Li B, Liu B, Wang Y, Hu R, Wang Y, Yang Z. Microstructure and mechanical properties of Al 2 O 3 ceramic and copper joints brazed with AgCuInTi brazing alloy. International Journal of Applied Ceramic Technology. 2024;21(6):4228-4240. doi:10.1111/ijac.14828

BibTeX
@article{Li2024,
  author = {Li, Botao and Liu, Ben and Wang, Yong and Hu, Ruoqi and Wang, Ying and Yang, Zhenwen},
  title = {Microstructure and mechanical properties of Al 2 O 3 ceramic and copper joints brazed with AgCuInTi brazing alloy},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2024},
  volume = {21},
  number = {6},
  pages = {4228--4240},
  doi = {10.1111/ijac.14828}
}
Kostenlos starten →