EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Regional metakaolin particle size reduction for higher strength geopolymer

Ruy A. Sa Ribeiro, Marilene G. Sa Ribeiro, Patrick F. Keane, Mauro R. Sardela, Pamela J. Sa Ribeiro, Waltraud M. Kriven

International Journal of Applied Ceramic Technology · 2024-09 · 21 (5) · 3184-3192

DOI: 10.1111/ijac.14766 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 08.04.2024. Verfasst von Ruy A. Sa Ribeiro und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Army Corps of Engineers.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this project was to further develop new composites and a testing program for the performance‐based specification for natural Amazonian geopolymer (GP) for use in ceramics and construction. While fly ash‐based alkali activated materials are now an established technology, metakaolin‐based GPs still need to be developed and optimized regarding the knowledge of the specific characteristics and properties of local resources. Amazonian kaolin was calcined into metakaolin (AMK). AMK particle size reduction for better reactive material was evaluated by means of dry and wet ball milling and sieving. Three types of metakaolin were analyzed for particle size distribution, and their size d 50 ranged from 7.9 to 2.8 µm. Further GP characterization followed physical and mechanical properties in flexural strength tests. In addition, scanning electron microscopy and energy dispersive spectroscopy were used to investigate the microstructure of the materials. Energy dispersive X‐ray fluorescence was used to measure the GP material composition. Analysis of the results revealed that the strength and stiffness of sodium–metakaolin‐based GP were inversely proportional to particle size. All distinct particle size GPs showed, in general, some increase in strength and stiffness within curing times ranging from 3 to 28 days.

Förderung

  • U.S. Army Corps of Engineers

Zitieren

APA

Ribeiro, R. A. S., Ribeiro, M. G. S., Keane, P. F., Sardela, M. R., Ribeiro, P. J. S., & Kriven, W. M. (2024). Regional metakaolin particle size reduction for higher strength geopolymer. International Journal of Applied Ceramic Technology, 21(5), 3184-3192. https://doi.org/10.1111/ijac.14766

Vancouver

Ribeiro RAS, Ribeiro MGS, Keane PF, Sardela MR, Ribeiro PJS, Kriven WM. Regional metakaolin particle size reduction for higher strength geopolymer. International Journal of Applied Ceramic Technology. 2024;21(5):3184-3192. doi:10.1111/ijac.14766

BibTeX
@article{Ribeiro2024,
  author = {Ribeiro, Ruy A. Sa and Ribeiro, Marilene G. Sa and Keane, Patrick F. and Sardela, Mauro R. and Ribeiro, Pamela J. Sa and Kriven, Waltraud M.},
  title = {Regional metakaolin particle size reduction for higher strength geopolymer},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2024},
  volume = {21},
  number = {5},
  pages = {3184--3192},
  doi = {10.1111/ijac.14766}
}
Kostenlos starten →