EUVIMEDEUVIMED entdecken
Crossref

Mechanical and electrical properties of 3Y‐TZP/TiSi 2 composites sintered at different temperatures

Weikang Liu, Ting Huang, Yucong Chen, Yingying Huang, Zhenhua Yao

International Journal of Applied Ceramic Technology · 2024-05 · 21 (3) · 2173-2182

DOI: 10.1111/ijac.14676 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 09.01.2024. Verfasst von Weikang Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Various amounts of TiSi 2 (30, 40, and 50 wt.%) were added to 3 mol% yttria stabilized tetragonal zirconia polycrystals (3Y‐TZP) to fabricate 3Y‐TZP/TiSi 2 composites by vacuum sintering. The effects of the TiSi 2 added amount, as well as the sintering temperature on the microstructure, mechanical, and electrical characteristics of the 3Y‐TZP/TiSi 2 composites were examined. The sintered samples consisted of three phases: tetragonal (t‐ZrO 2 ), TiSi 2 , and reaction product Ti 5 Si 3 . The maximum bending strength and relative density of the composites, reaching 501.20 MPa and 98.59% respectively, were achieved at a TiSi 2 content of 30 wt.% and sintering temperature of 1500°C. The resistivity of 3Y‐TZP/TiSi 2 composites showed a nonlinear decrease with increasing TiSi 2 content. These results indicated that 3Y‐TZP/TiSi 2 composites had a typical percolation threshold phenomenon due to the different TiSi 2 content and a conductivity model of 3Y‐TZP/TiSi 2 composites at room temperature was founded on the generalized effective medium equation. The resistivity of the composites could optionally adjust between 10 2 and 10 −4 Ω·cm with 30–50 wt.% TiSi 2 under room temperature. Overall, the 3Y‐TZP/TiSi 2 composites show great potential for applications in the heat‐not‐burn tobacco field.

Zitieren

APA

Liu, W., Huang, T., Chen, Y., Huang, Y., & Yao, Z. (2024). Mechanical and electrical properties of 3Y‐TZP/TiSi 2 composites sintered at different temperatures. International Journal of Applied Ceramic Technology, 21(3), 2173-2182. https://doi.org/10.1111/ijac.14676

Vancouver

Liu W, Huang T, Chen Y, Huang Y, Yao Z. Mechanical and electrical properties of 3Y‐TZP/TiSi 2 composites sintered at different temperatures. International Journal of Applied Ceramic Technology. 2024;21(3):2173-2182. doi:10.1111/ijac.14676

BibTeX
@article{Liu2024,
  author = {Liu, Weikang and Huang, Ting and Chen, Yucong and Huang, Yingying and Yao, Zhenhua},
  title = {Mechanical and electrical properties of 3Y‐TZP/TiSi 2 composites sintered at different temperatures},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2024},
  volume = {21},
  number = {3},
  pages = {2173--2182},
  doi = {10.1111/ijac.14676}
}
Kostenlos starten →