EUVIMEDEUVIMED entdecken
Crossref

Utilization of copper slag in the fabrication of silica refractory: Characteristics and performance evaluation

Zihao Lv, Huazhi Gu, Meijie Zhang, Shuang Yang, Lvping Fu, Ao Huang

International Journal of Applied Ceramic Technology · 2024-01 · 21 (1) · 581-589

DOI: 10.1111/ijac.14515 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 18.08.2023. Verfasst von Zihao Lv und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is urgently necessary for environmental resource utilization of copper slag with incremental quantities of stacked copper slag. In this paper, copper slag has been used as mineralizer and raw material to prepare silica refractory. The effect of copper slag on phase composition, microstructure, mechanical, and load deformation performance has been investigated. The results indicate that the components of copper slag as mineralizer promote the formation of tridymite. Simultaneously, copper slag promotes the densification of silica refractory and glass phase increases due to the mineralizer and impurities in copper slag. The increased glass phase promotes the cold crushing strength and cold modulus of rupture for silica refractory, while the hot modulus of rupture slightly decreases by 1.5 MPa for 6 wt% copper slag. In addition, the load softening temperature and high‐temperature creep attains 1632.6°C and ‐5.5%, respectively. It is estimated that the potential application of silica refractory with copper slag on upper part of copper stove (low‐temperature and low‐load region) is acceptable in consideration of environmental utilization of solid waste.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Lv, Z., Gu, H., Zhang, M., Yang, S., Fu, L., & Huang, A. (2024). Utilization of copper slag in the fabrication of silica refractory: Characteristics and performance evaluation. International Journal of Applied Ceramic Technology, 21(1), 581-589. https://doi.org/10.1111/ijac.14515

Vancouver

Lv Z, Gu H, Zhang M, Yang S, Fu L, Huang A. Utilization of copper slag in the fabrication of silica refractory: Characteristics and performance evaluation. International Journal of Applied Ceramic Technology. 2024;21(1):581-589. doi:10.1111/ijac.14515

BibTeX
@article{Lv2024,
  author = {Lv, Zihao and Gu, Huazhi and Zhang, Meijie and Yang, Shuang and Fu, Lvping and Huang, Ao},
  title = {Utilization of copper slag in the fabrication of silica refractory: Characteristics and performance evaluation},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2024},
  volume = {21},
  number = {1},
  pages = {581--589},
  doi = {10.1111/ijac.14515}
}
Kostenlos starten →