EUVIMEDEUVIMED entdecken
Crossref

In Vitro Characterisation of Resonant Behaviour of Separated Ni–Ti Endodontic File Fragments Using a Biomechanical Modelling Approach

Vidhi Kiran Bhalla iD, Devender Nath Maurya iD, Amit Malhotra iD, Ruchika Roongta Nawal iD, Shahid Malik, Sangeeta Talwar iD

International Endodontic Journal · 2026

DOI: 10.1111/iej.70206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Endodontic Journal, 2026. Verfasst von Vidhi Kiran Bhalla und 5 weiteren Autor:innen. Beteiligte Einrichtung: Dental Technology Innovation Hub, Maulana Azad Institute of Dental Sciences, New Delhi, India. Hauptthemen laut MEDLINE: Titanium, Nickel, Root Canal Preparation, Dental Instruments. Die Arbeit nennt 25 Literaturangaben. Gefördert von: Department of Science and Technology, Ministry of Science and Technology, India.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

Instrument separation is a recognised complication of endodontic therapy, particularly with nickel–titanium (Ni–Ti) rotary instruments. Ultrasonic retrieval is widely used; however, its effectiveness depends on efficient transmission of vibrational energy to the separated fragment. Delivering energy closer to the fragment's resonant frequency may enhance energy transfer and fragment mobilisation. The resonant behaviour of fractured Ni–Ti instruments, however, remains poorly understood. This study analysed the resonant frequency of separated Ni–Ti rotary endodontic files using a biomechanical modelling approach.

Methods

Fractured Ni–Ti instruments were modelled as apically fixed cantilever beams. Flexural and longitudinal resonant frequencies were calculated using beam theory. Material properties were derived from the literature, while fragment length and diameter were varied across 8736 simulated configurations generated using a customised computational model. Multiple linear regression analysis assessed the influence of geometric and material parameters on effective resonant frequency.

Results

Predicted resonant frequencies ranged from 11 to 116 kHz, exceeding the operating frequencies of most commercially available ultrasonic devices. Geometric parameters, particularly fragment length and diameter, were significant predictors of resonant frequency. Increasing fragment length and decreasing effective diameter consistently reduced resonant frequency.

Conclusions

Fragment geometry primarily determines the resonant frequency of fractured Ni–Ti instruments. Most fragments resonate at frequencies higher than those generated by current ultrasonic systems, suggesting a potential frequency mismatch that may influence retrieval efficiency.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumNickelRoot Canal PreparationDental InstrumentsBiomechanical PhenomenaEquipment FailureIn Vitro TechniquesEquipment DesignVibrationHumans

Stichwörter der Autor:innen

instrument fractureinstrument retrievalresonant frequencyultrasonics

Substanzen

TitaniumNickeltitanium nickelide

Autor:innen und Institutionen

  • Dental Technology Innovation Hub, Maulana Azad Institute of Dental Sciences, New Delhi, India.
  • Department of Conservative Dentistry and Endodontics, Maulana Azad Institute of Dental Sciences, New Delhi, India.
  • IIT Delhi, New Delhi, India.
  • Department of SENSE, IIT Delhi, New Delhi, India.

ORCID-Profile: Vidhi Kiran Bhalla, Devender Nath Maurya, Amit Malhotra, Ruchika Roongta Nawal, Sangeeta Talwar

Förderung

  • Department of Science and Technology, Ministry of Science and Technology, India

Zitieren

APA

Bhalla, V. K., Maurya, D. N., Malhotra, A., Nawal, R. R., Malik, S., & Talwar, S. (2026). In Vitro Characterisation of Resonant Behaviour of Separated Ni–Ti Endodontic File Fragments Using a Biomechanical Modelling Approach. International Endodontic Journal. https://doi.org/10.1111/iej.70206

Vancouver

Bhalla VK, Maurya DN, Malhotra A, Nawal RR, Malik S, Talwar S. In Vitro Characterisation of Resonant Behaviour of Separated Ni–Ti Endodontic File Fragments Using a Biomechanical Modelling Approach. International Endodontic Journal. 2026. doi:10.1111/iej.70206

BibTeX
@article{Bhalla2026,
  author = {Bhalla, Vidhi Kiran and Maurya, Devender Nath and Malhotra, Amit and Nawal, Ruchika Roongta and Malik, Shahid and Talwar, Sangeeta},
  title = {In Vitro Characterisation of Resonant Behaviour of Separated Ni–Ti Endodontic File Fragments Using a Biomechanical Modelling Approach},
  journal = {International Endodontic Journal},
  year = {2026},
  doi = {10.1111/iej.70206}
}
Kostenlos starten →