EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Global and Local Sensitivity Analysis of Heat Transport in Fractured Rock Using a Modified Implementation of the LH ‐ OAT Method

Xiao‐long Wu, Bernard H. Kueper, Kent Novakowski

Groundwater Monitoring & Remediation · 2025-01 · 45 (1) · 55-67

DOI: 10.1111/gwmr.12696 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Groundwater Monitoring & Remediation, online erschienen am 15.11.2024. Verfasst von Xiao‐long Wu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal remediation of contaminated sites in fractured bedrock is complicated by the characterization and identification of heat transfer between fractures and matrix, and the complex interactions between the hydrogeological and thermodynamic parameters. A three‐dimensional numerical model was applied to investigate these issues using global and local sensitivity analyses for the significance of six variables that potentially influence the heating performance in fractured rock. These variables include the radius and energy delivery strength of the heat source (which were used to study the scale effect and heating processes), the fracture aperture, fracture spacing, groundwater flow velocity, and the thermal conductivity of the rock matrix. A discrete Latin Hypercube‐One‐at‐A‐Time (LH‐OAT) scheme is proposed and utilized as an experimental design and data analysis method for the discrete variables that apply to this case. The results show that at all four monitoring points within the heating area, the radius of the source and energy delivery strength are the most sensitive parameters. To minimize heat dissipation, additional heating wells are demonstrated to be effective for a small or pilot scale site (5 < r < 10 m), while the increase of energy delivery strength is more applicable for larger sites. Extra efforts should be invested to minimize heat dissipation when large fractures (2 b > 1600 μm) are identified in the heating area. Re‐samplings and re‐evaluations with one‐way perturbation in both positive and negative directions are thus suggested to avoid biased results caused by perturbations that occur in only positive or negative directions.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Wu, X., Kueper, B. H., & Novakowski, K. (2025). Global and Local Sensitivity Analysis of Heat Transport in Fractured Rock Using a Modified Implementation of the LH ‐ OAT Method. Groundwater Monitoring & Remediation, 45(1), 55-67. https://doi.org/10.1111/gwmr.12696

Vancouver

Wu X, Kueper BH, Novakowski K. Global and Local Sensitivity Analysis of Heat Transport in Fractured Rock Using a Modified Implementation of the LH ‐ OAT Method. Groundwater Monitoring & Remediation. 2025;45(1):55-67. doi:10.1111/gwmr.12696

BibTeX
@article{Wu2025,
  author = {Wu, Xiao‐long and Kueper, Bernard H. and Novakowski, Kent},
  title = {Global and Local Sensitivity Analysis of Heat Transport in Fractured Rock Using a Modified Implementation of the LH ‐ OAT Method},
  journal = {Groundwater Monitoring & Remediation},
  year = {2025},
  volume = {45},
  number = {1},
  pages = {55--67},
  doi = {10.1111/gwmr.12696}
}
Kostenlos starten →