EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Generating a Statistically Constrained Quaternary Model of a Buried Bedrock Valley Using FDEM

C Gorrie iD, C M Steelman, O Conway-White, A Smiarowski, E Arnaud, B L Parker

Groundwater · 2025

DOI: 10.1111/gwat.13478 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Groundwater, 2025. Verfasst von C Gorrie und 5 weiteren Autor:innen. Beteiligte Einrichtung: MG360 Morwick Groundwater Research Institute, College of Physical and Engineering Science, University of Guelph, Guelph, Ontario, Canada. Hauptthemen laut MEDLINE: Geologic Sediments, Models, Theoretical, Groundwater, Environmental Monitoring. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Southern Ontraio Water Consortium.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An airborne electromagnetic (AEM) survey was conducted using the Resolve™ frequency‐domain system over a buried bedrock valley near Elora, Ontario, Canada. A statistical bootstrapping approach was used to establish a relationship between the electrical resistivity from spatially interpolated one‐dimensional AEM resistivity models and the lithostratigraphy of Quaternary sediments logged in continuously cored holes located within and adjacent to the buried bedrock valley. Three lithology types were classified using a bootstrapping approach: (i) clay, (ii) sandy to muddy diamicton with the presence of clasts, and (iii) sand/gravel. The statistically derived ranges in electrical resistivity from the model were used to generate a lithostratigraphic model of the Quaternary deposits along the valley axis. The resulting lithology model differentiated more electrically resistive coarse‐grained sand and gravel from electrically conductive finer‐grained clay‐rich tills; but was not able to resolve interbedded layers associated with complex fluvial deposits. Modeled Quaternary deposit architecture and bedrock morphology along two transects orthogonal to the valley axis were consistent with co‐located surface electrical resistivity tomography models and borehole natural gamma logs, indicating that the AEM method, when calibrated using high‐quality continuous‐core logs, can support quantitative conceptualizations of complex Quaternary architecture within and around a buried bedrock valley. Key limitations in this approach were the reduced vertical resolution of the AEM method and the inability to resolve thinly bedded layers (meter scale) identified in the core logs that may have a hydrogeologic influence. This study demonstrates the utility of combining airborne electrical methods with high‐resolution geological logs through statistical analysis to constrain hydrostratigraphic architecture at scales relevant to municipal groundwater flow systems.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Geologic SedimentsModels, TheoreticalGroundwaterEnvironmental MonitoringOntarioElectromagnetic Phenomena

Autor:innen und Institutionen

  • MG360 Morwick Groundwater Research Institute, College of Physical and Engineering Science, University of Guelph, Guelph, Ontario, Canada.
  • School of Engineering, University of Guelph, Guelph, Ontario, Canada.
  • Department of Earth and Environmental Sciences, University of Waterloo, Waterloo, Ontario, Canada.
  • XCalibur Multiphysics, Mississauga, Ontario, Canada.
  • School of Environmental Sciences, University of Guelph, Guelph, Ontario, Canada.

ORCID-Profile: C Gorrie

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Southern Ontraio Water Consortium

Zitieren

APA

Gorrie, C., Steelman, C. M., Conway-White, O., Smiarowski, A., Arnaud, E., & Parker, B. L. (2025). Generating a Statistically Constrained Quaternary Model of a Buried Bedrock Valley Using FDEM. Groundwater. https://doi.org/10.1111/gwat.13478

Vancouver

Gorrie C, Steelman CM, Conway-White O, Smiarowski A, Arnaud E, Parker BL. Generating a Statistically Constrained Quaternary Model of a Buried Bedrock Valley Using FDEM. Groundwater. 2025. doi:10.1111/gwat.13478

BibTeX
@article{Gorrie2025,
  author = {Gorrie, C and Steelman, C M and Conway-White, O and Smiarowski, A and Arnaud, E and Parker, B L},
  title = {Generating a Statistically Constrained Quaternary Model of a Buried Bedrock Valley Using FDEM},
  journal = {Groundwater},
  year = {2025},
  doi = {10.1111/gwat.13478}
}
Kostenlos starten →