EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Evaluation of Hydraulic Conductivity Estimates from Various Approaches with Groundwater Flow Models

Dongwei Sun, Ning Luo, Aaron Vandenhoff, Wesley McCall, Zhanfeng Zhao, Chenxi Wang, David L Rudolph, Walter A Illman

Groundwater · 2024

DOI: 10.1111/gwat.13348 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Groundwater, 2024. Verfasst von Dongwei Sun und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Earth and Environmental Sciences, University of Waterloo, Waterloo, ON, N2L3G1, Canada. Hauptthemen laut MEDLINE: Groundwater, Water Movements, Models, Theoretical. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 102 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Significant efforts have been expended for improved characterization of hydraulic conductivity ( K ) and specific storage ( S s ) to better understand groundwater flow and contaminant transport processes. Conventional methods including grain size analyses (GSA), permeameter, slug, and pumping tests have been utilized extensively, while Direct Push‐based Hydraulic Profiling Tool (HPT) surveys have been developed to obtain high‐resolution K estimates. Moreover, inverse modeling approaches based on geology‐based zonations, and highly parameterized Hydraulic Tomography (HT) have also been advanced to map spatial variations of K and S s between and beyond boreholes. While different methods are available, it is unclear which one yields K estimates that are most useful for high resolution predictions of groundwater flow. Therefore, the main objective of this study is to evaluate various K estimates at a highly heterogeneous field site obtained with three categories of characterization techniques including: (1) conventional methods (GSA, permeameter, and slug tests); (2) HPT surveys; and (3) inverse modeling based on geology‐based zonations and highly parameterized approaches. The performance of each approach is first qualitatively analyzed by comparing K estimates to site geology. Then, steady‐state and transient groundwater flow models are employed to quantitatively assess various K estimates by simulating pumping tests not used for parameter estimation. Results reveal that inverse modeling approaches yield the best drawdown predictions under both steady and transient conditions. In contrast, conventional methods and HPT surveys yield biased predictions. Based on our research, it appears that inverse modeling and data fusion are necessary steps in predicting accurate groundwater flow behavior.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GroundwaterWater MovementsModels, TheoreticalHydrologyEnvironmental Monitoring

Autor:innen und Institutionen

  • Department of Earth and Environmental Sciences, University of Waterloo, Waterloo, ON, N2L3G1, Canada.
  • Geoprobe Systems Inc, 1835 Wall Street, Salina, KS, 67401, USA.
  • Key Laboratory of Water Cycle and Related Land Surface Processes, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing, China.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Sun, D., Luo, N., Vandenhoff, A., McCall, W., Zhao, Z., Wang, C., Rudolph, D. L., & Illman, W. A. (2024). Evaluation of Hydraulic Conductivity Estimates from Various Approaches with Groundwater Flow Models. Groundwater. https://doi.org/10.1111/gwat.13348

Vancouver

Sun D, Luo N, Vandenhoff A, McCall W, Zhao Z, Wang C, et al. Evaluation of Hydraulic Conductivity Estimates from Various Approaches with Groundwater Flow Models. Groundwater. 2024. doi:10.1111/gwat.13348

BibTeX
@article{Sun2024,
  author = {Sun, Dongwei and Luo, Ning and Vandenhoff, Aaron and McCall, Wesley and Zhao, Zhanfeng and Wang, Chenxi and Rudolph, David L and Illman, Walter A},
  title = {Evaluation of Hydraulic Conductivity Estimates from Various Approaches with Groundwater Flow Models},
  journal = {Groundwater},
  year = {2024},
  doi = {10.1111/gwat.13348}
}
Kostenlos starten →