EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

STDGL3 , a Reference Material for Analysis of Sulfide Minerals by Laser Ablation ICP‐MS : An Assessment of Matrix Effects and the Impact of Laser Wavelengths and Pulse Widths

Ivan Belousov, Leonid Danyushevsky, Karsten Goemann, Sarah Gilbert, Paul Olin, Jay Thompson, Elena Lounejeva, Dieter Garbe‐Schönberg

Geostandards and Geoanalytical Research · 2023-09 · 47 (3) · 493-508

DOI: 10.1111/ggr.12512 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Geostandards and Geoanalytical Research, online erschienen am 13.06.2023. Verfasst von Ivan Belousov und 7 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A new reference material, STDGL3, for the calibration of in situ analyses of sulfide minerals by LA‐ICP‐MS has been developed and characterised. It represents a lithium‐borate‐based glass containing a mixture of Zn‐ and Fe‐sulfide concentrates doped with several chalcophile elements as well as Zr, Gd, Hf and Ta required for assessing common interferences on Ag, Au and Pt. STDGL3 has a wider range of elements and a better homogeneity compared with existing reference materials for LA‐ICP‐MS analysis of sulfides. Compositional variations for most elements are below 3% RSD, below 5% RSD for Ag, Au and Pt, and below 7% RSD for Se, when performing spot analyses with a 50 μm beam size. Its preparation recipe is reproducible allowing for multiple batches to be made. Use of STDGL3 significantly improves accuracy of sulfide mineral analysis by LA‐ICP‐MS when compared with use of other available reference materials. Performance of STDGL3 was evaluated using several different laser systems. No significant change was observed between 193 nm ArF excimer lasers with 5 and 20 ns pulse widths, but use of 213 and 248 nm lasers displays more systematic differences, especially when analysing galena. Correction coefficients are needed for some elements (Zn and Cd in particular) when analysing sulfide minerals using STDGL3 as a calibration reference material.

Zitieren

APA

Belousov, I., Danyushevsky, L., Goemann, K., Gilbert, S., Olin, P., Thompson, J., Lounejeva, E., & Garbe‐Schönberg, D. (2023). STDGL3 , a Reference Material for Analysis of Sulfide Minerals by Laser Ablation ICP‐MS : An Assessment of Matrix Effects and the Impact of Laser Wavelengths and Pulse Widths. Geostandards and Geoanalytical Research, 47(3), 493-508. https://doi.org/10.1111/ggr.12512

Vancouver

Belousov I, Danyushevsky L, Goemann K, Gilbert S, Olin P, Thompson J, et al. STDGL3 , a Reference Material for Analysis of Sulfide Minerals by Laser Ablation ICP‐MS : An Assessment of Matrix Effects and the Impact of Laser Wavelengths and Pulse Widths. Geostandards and Geoanalytical Research. 2023;47(3):493-508. doi:10.1111/ggr.12512

BibTeX
@article{Belousov2023,
  author = {Belousov, Ivan and Danyushevsky, Leonid and Goemann, Karsten and Gilbert, Sarah and Olin, Paul and Thompson, Jay and Lounejeva, Elena and Garbe‐Schönberg, Dieter},
  title = {STDGL3 , a Reference Material for Analysis of Sulfide Minerals by Laser Ablation ICP‐MS : An Assessment of Matrix Effects and the Impact of Laser Wavelengths and Pulse Widths},
  journal = {Geostandards and Geoanalytical Research},
  year = {2023},
  volume = {47},
  number = {3},
  pages = {493--508},
  doi = {10.1111/ggr.12512}
}
Kostenlos starten →