Damage‐Based Fatigue Assessment of K‐Type Cast Steel Joints Considering Welding Residual Stresses and Casting Defects
Fatigue & Fracture of Engineering Materials & Structures · 10.11.2026
DOI: 10.1111/ffe.70530 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 10.11.2026. Verfasst von Jun Wu und 5 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Cast steel joints in steel truss bridges are vulnerable to fatigue damage due to welding residual stresses and casting defects. This study develops a damage‐based framework that incorporates welding residual stresses and defect‐induced initial damage into an atomic thermal perturbation damage model. Model parameters for ZG300‐500H cast steel and Q345qD steel were calibrated using high‐cycle fatigue tests and literature data, and the model was applied to a K‐type cast steel joint with an asymmetric circumferential butt weld and internal porosity defects. Increasing axle weight reduced the predicted fatigue life from 2.19 × 10 6 to 6.3 × 10 5 cycles, with each 10‐kN increase causing a 33%–35% reduction. Welding residual stresses reduced fatigue life on the cast steel side by 56.3%, while porosity defects caused reductions of up to 82.5%. These results highlight the need to consider residual stresses and initial defects in fatigue life assessment of cast steel joints.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wu, J., Qiang, B., Xu, Z., Wu, T., Wu, H., & Li, Y. (2026). Damage‐Based Fatigue Assessment of K‐Type Cast Steel Joints Considering Welding Residual Stresses and Casting Defects. Fatigue & Fracture of Engineering Materials & Structures. https://doi.org/10.1111/ffe.70530
Vancouver
Wu J, Qiang B, Xu Z, Wu T, Wu H, Li Y. Damage‐Based Fatigue Assessment of K‐Type Cast Steel Joints Considering Welding Residual Stresses and Casting Defects. Fatigue & Fracture of Engineering Materials & Structures. 2026. doi:10.1111/ffe.70530
BibTeX
@article{Wu2026,
author = {Wu, Jun and Qiang, Bin and Xu, Zhiyong and Wu, Tao and Wu, Hang and Li, Yadong},
title = {Damage‐Based Fatigue Assessment of K‐Type Cast Steel Joints Considering Welding Residual Stresses and Casting Defects},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2026},
doi = {10.1111/ffe.70530}
}
EUVIMED