High Cycle Fatigue Properties of PM‐HIPed High‐Nitrogen Tool Steel: Effect of Surface Condition
Fatigue & Fracture of Engineering Materials & Structures · 2026-06 · 49 (6) · 2097-2115
DOI: 10.1111/ffe.70238 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 06.03.2026. Verfasst von Faezeh Javadzadeh Kalahroudi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study explores the impact of surface condition on high‐cycle fatigue performance of a high‐nitrogen martensitic tool steel manufactured through powder metallurgy and hot isostatic pressing. In near‐net manufacturing applications, acid‐leaching pickling treatment and/or machining is used as a post‐treatment to remove the powder container. To assess the impact of these two treatments, surface properties and fatigue behavior were investigated in as‐pickled and machined surface conditions. The results revealed that as‐pickled samples had significantly higher surface roughness, higher surface compressive residual stress, higher surface hardness, lower amount of retained austenite, and lower carbon and nitrogen content than the machined ones. Despite high compressive residual stress in the as‐pickled samples, the surface roughness imposed a limit on fatigue strength. Additionally, the compressive residual stress altered the dominant fatigue crack initiation mechanism, shifting it from surface defects to internal non‐metallic inclusions in both surface conditions. These findings highlight the combined influence of surface roughness, residual stress, and inclusion characteristics in determining fatigue life.
Zitieren
APA
Kalahroudi, F. J., Nikas, D., Maistro, G., & Grehk, M. (2026). High Cycle Fatigue Properties of PM‐HIPed High‐Nitrogen Tool Steel: Effect of Surface Condition. Fatigue & Fracture of Engineering Materials & Structures, 49(6), 2097-2115. https://doi.org/10.1111/ffe.70238
Vancouver
Kalahroudi FJ, Nikas D, Maistro G, Grehk M. High Cycle Fatigue Properties of PM‐HIPed High‐Nitrogen Tool Steel: Effect of Surface Condition. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(6):2097-2115. doi:10.1111/ffe.70238
BibTeX
@article{Kalahroudi2026,
author = {Kalahroudi, Faezeh Javadzadeh and Nikas, Dimitrios and Maistro, Giulio and Grehk, Mikael},
title = {High Cycle Fatigue Properties of PM‐HIPed High‐Nitrogen Tool Steel: Effect of Surface Condition},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2026},
volume = {49},
number = {6},
pages = {2097--2115},
doi = {10.1111/ffe.70238}
}
EUVIMED