EUVIMEDEUVIMED entdecken
Crossref

A calculation method for the mode II fracture energy release rate of dissimilar materials adhesively bonded structures

Jian Wang, Huiming Ding, Junxia Jiang, Yunbo Bi

Fatigue & Fracture of Engineering Materials & Structures · 2023-05 · 46 (5) · 1704-1720

DOI: 10.1111/ffe.13953 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 23.01.2023. Verfasst von Jian Wang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, fracture characterization of dissimilar materials adhesively bonded structures still generally refers to standards for fiber‐reinforced plastic composites. Moreover, the calculation methods of fracture energy release rate specified in these standards often lead to great deviation due to the differences in material properties and geometry. In this paper, dissimilar materials corrected beam theory with effective crack length (DM‐CBTE) method for calculation of mode II fracture energy release rate of dissimilar materials adhesively bonded structures was proposed. The differences in material properties and geometry as well as the effect of clamp were all considered. The experimental and J‐integral numerical analysis results showed that the maximum deviation of the G IIC calculated by the methods recommended in standard from the J‐integral result is 28% while that by the DM‐CBTE method is only 5%, which proved good feasibility of the DM‐CBTE method for evaluation of mode II fracture performance of dissimilar materials adhesively bonded structures.

Zitieren

APA

Wang, J., Ding, H., Jiang, J., & Bi, Y. (2023). A calculation method for the mode II fracture energy release rate of dissimilar materials adhesively bonded structures. Fatigue & Fracture of Engineering Materials & Structures, 46(5), 1704-1720. https://doi.org/10.1111/ffe.13953

Vancouver

Wang J, Ding H, Jiang J, Bi Y. A calculation method for the mode II fracture energy release rate of dissimilar materials adhesively bonded structures. Fatigue & Fracture of Engineering Materials & Structures. 2023;46(5):1704-1720. doi:10.1111/ffe.13953

BibTeX
@article{Wang2023,
  author = {Wang, Jian and Ding, Huiming and Jiang, Junxia and Bi, Yunbo},
  title = {A calculation method for the mode II fracture energy release rate of dissimilar materials adhesively bonded structures},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2023},
  volume = {46},
  number = {5},
  pages = {1704--1720},
  doi = {10.1111/ffe.13953}
}
Kostenlos starten →