EUVIMEDEUVIMED entdecken
Systematische ÜbersichtOpen Access · CC BY-NC-ND 4.0

Additively and subtractively manufactured implant‐supported fixed dental prostheses: A systematic review

Alexis Ioannidis iD, Kevser Pala, Franz J Strauss iD, Jenni Hjerppe, Ronald E Jung iD, Tim Joda

Clinical Oral Implants Research · 2023

DOI: 10.1111/clr.14085 ↗

Kurz gefasst

Systematische Übersicht in der Zeitschrift Clinical Oral Implants Research, 2023. Verfasst von Alexis Ioannidis und 5 weiteren Autor:innen. Beteiligte Einrichtung: Clinic of Reconstructive Dentistry, Center of Dental Medicine, University of Zurich, Zurich, Switzerland. Hauptthemen laut MEDLINE: Dental Implants. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

To compare and report on the performance of implant‐supported fixed dental prostheses (iFDPs) fabricated using additive (AM) or subtractive (SM) manufacturing.

Methods

An electronic search was conducted (Medline, Embase, Cochrane Central, Epistemonikos, clinical trials registries) with a focused PICO question: In partially edentulous patients with missing single (or multiple) teeth undergoing dental implant therapy (P), do AM iFDPs (I) compared to SM iFDPs (C) result in improved clinical performance (O)? Included were studies comparing AM to SM iFDPs (randomized clinical trials, prospective/retrospective clinical studies, case series, in vitro studies).

Results

Of 2′184 citations, no clinical study met the inclusion criteria, whereas six in vitro studies proved to be eligible. Due to the lack of clinical studies and considerable heterogeneity across the studies, no meta‐analysis could be performed. AM iFDPs were made of zirconia and polymers. For SM iFDPs, zirconia, lithium disilicate, resin‐modified ceramics and different types of polymer‐based materials were used. Performance was evaluated by assessing marginal and internal discrepancies and mechanical properties (fracture loads, bending moments). Three of the included studies examined the marginal and internal discrepancies of interim or definitive iFDPs, while four examined mechanical properties. Based on marginal and internal discrepancies as well as the mechanical properties of AM and SM iFDPs, the studies revealed inconclusive results.

Conclusion

Despite the development of AM and the comprehensive search, there is very limited data available on the performance of AM iFDPs and their comparison to SM techniques. Therefore, the clinical performance of iFDPs by AM remains to be elucidated.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental ImplantsHumansProspective StudiesRetrospective StudiesCeramicsPolymersZirconium

Stichwörter der Autor:innen

3 Dimensional Printing3 D PrintingCAD-CAMComputer-Aided DesignComputer-Aided ManufacturingDental ProsthesisImplant-SupportedThree-Dimensional Printingadditive manufacturingdental implantssingle tooth

Substanzen

Dental ImplantsPolymerszirconium oxideZirconium

Autor:innen und Institutionen

  • Clinic of Reconstructive Dentistry, Center of Dental Medicine, University of Zurich, Zurich, Switzerland.
  • Department of Reconstructive Dentistry, University Center for Dental Medicine Basel, University of Basel, Basel, Switzerland.

ORCID-Profile: Alexis Ioannidis, Franz J Strauss, Ronald E Jung

Zitieren

APA

Ioannidis, A., Pala, K., Strauss, F. J., Hjerppe, J., Jung, R. E., & Joda, T. (2023). Additively and subtractively manufactured implant‐supported fixed dental prostheses: A systematic review. Clinical Oral Implants Research. https://doi.org/10.1111/clr.14085

Vancouver

Ioannidis A, Pala K, Strauss FJ, Hjerppe J, Jung RE, Joda T. Additively and subtractively manufactured implant‐supported fixed dental prostheses: A systematic review. Clinical Oral Implants Research. 2023. doi:10.1111/clr.14085

BibTeX
@article{Ioannidis2023,
  author = {Ioannidis, Alexis and Pala, Kevser and Strauss, Franz J and Hjerppe, Jenni and Jung, Ronald E and Joda, Tim},
  title = {Additively and subtractively manufactured implant‐supported fixed dental prostheses: A systematic review},
  journal = {Clinical Oral Implants Research},
  year = {2023},
  doi = {10.1111/clr.14085}
}
Kostenlos starten →