EUVIMEDEUVIMED entdecken
Crossref

Finite Element Analysis of Novaloc Attachments at Extreme Angulations and Arch Forms: A Specification Study

Sultan Merve Uçar iD, Rafat Sasany iD, Hanan Al-Johani iD

Clinical Implant Dentistry and Related Research · 2025

DOI: 10.1111/cid.70082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical Implant Dentistry and Related Research, 2025. Verfasst von Sultan Merve Uçar und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Faculty of Dentistry, Istanbul Biruni University, Istanbul, Turkey. Hauptthemen laut MEDLINE: Finite Element Analysis, Denture, Overlay, Dental Prosthesis, Implant-Supported. Die Arbeit nennt 40 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Statement of Problem Due to its biomechanical advantages, the Novaloc attachment system with angulated abutments has gained popularity in two‐implant‐supported mandibular overdentures. However, limited data are available on how implant position, angulation, and arch form affect stress and strain distribution within the attachment system. Understanding these factors is essential for optimizing prosthetic longevity and clinical outcomes.

Purpose

This finite element analysis (FEA) study aimed to evaluate the impact of implant position, angulation, and mandibular arch form on stress and strain distribution in Novaloc overdenture attachment systems. Materials and Methods A computed tomography (CT) scan of an edentulous mandible was segmented using 3D Slicer software, and three mandibular arch forms (ovoid, tapered, square) were modeled in a three‐dimensional FEA environment (ANSYS Workbench, ANSYS Inc.). Implants and the Novaloc attachment system were designed and integrated using ANSYS SpaceClaim software. Finite element models were generated with implant angulations of 0°, 15°, 40°, and 60°, positioned at three locations: lateral incisor region, midpoint between lateral incisor and canine, and canine region. Vertical and oblique loads were applied in the first molar region to simulate masticatory forces. Von Mises stress distribution and dislocation forces were recorded and analyzed.

Results

The highest stresses were observed in canine‐positioned implants within tapered arches under 30° oblique loading. Stresses in Novaloc abutments (36.85–40.27 MPa) and inserts (13.89–15.31 MPa) approached their mechanical limits. Increasing implant angulation up to a total of 60° between implants increased stresses on the abutments while reducing stresses and displacement in the inserts. Oblique forces (30°) generated higher stresses compared to vertical and 45° oblique forces. Among mandibular arch forms, stress distribution followed the pattern: tapered > ovoid > square.

Conclusions

Anterior implant positioning in two‐implant‐supported overdentures resulted in more favorable stress distribution within the Novaloc attachment system. Implant angulations up to 60° had a minimal effect on stress patterns, suggesting that angulated abutments may be a viable alternative in cases with anatomical limitations. These findings provide biomechanical insights that may aid in optimizing implant placement and attachment selection in clinical practice.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Finite Element AnalysisDenture, OverlayDental Prosthesis, Implant-SupportedHumansMandibleDental Stress AnalysisBiomechanical PhenomenaStress, MechanicalTomography, X-Ray ComputedDental AbutmentsDental Arch

Autor:innen und Institutionen

  • Department of Prosthodontics, Faculty of Dentistry, Istanbul Biruni University, Istanbul, Turkey.
  • Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia.

ORCID-Profile: Sultan Merve Uçar, Rafat Sasany, Hanan Al-Johani

Zitieren

APA

Uçar, S. M., Sasany, R., & Al-Johani, H. (2025). Finite Element Analysis of Novaloc Attachments at Extreme Angulations and Arch Forms: A Specification Study. Clinical Implant Dentistry and Related Research. https://doi.org/10.1111/cid.70082

Vancouver

Uçar SM, Sasany R, Al-Johani H. Finite Element Analysis of Novaloc Attachments at Extreme Angulations and Arch Forms: A Specification Study. Clinical Implant Dentistry and Related Research. 2025. doi:10.1111/cid.70082

BibTeX
@article{Uar2025,
  author = {Uçar, Sultan Merve and Sasany, Rafat and Al-Johani, Hanan},
  title = {Finite Element Analysis of Novaloc Attachments at Extreme Angulations and Arch Forms: A Specification Study},
  journal = {Clinical Implant Dentistry and Related Research},
  year = {2025},
  doi = {10.1111/cid.70082}
}
Kostenlos starten →