EUVIMEDEUVIMED entdecken
Crossref

Osteoinductively Functionalized 3D ‐Printed Scaffold for Vertical Bone Augmentation in Beagle Dogs

Ting Wang iD, Gaoli Xu iD, Chuankai Zhang, Tymour Forouzanfar iD, Junwei Liang, Yulei Pan, Chenxi Shen, Gang Wu iD, Haiyan Lin iD

Clinical Implant Dentistry and Related Research · 2025

DOI: 10.1111/cid.13408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical Implant Dentistry and Related Research, 2025. Verfasst von Ting Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral and Maxillofacial Surgery, Leiden University Medical Center (LUMC), Leiden, The Netherlands. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tissue Scaffolds, Bone Morphogenetic Protein 2, Alveolar Ridge Augmentation. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 64 Literaturangaben. Gefördert von: China Scholarship Council, Key Research and Development Program of Zhejiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To evaluate the efficacy of 3D‐printed scaffolds that were osteoinductively functionalized with a bone morphogenetic protein 2 (BMP‐2)‐incorporated biomimetic calcium phosphate particles (BMP‐2‐inc. BpNcCaP)/hyaluronic acid (HA) composite gel in vertical bone augmentation in beagle dogs. Materials and Methods Four Beagle dogs were used in this study. Three months after the extraction of 1st, 2nd, 3rd, and 4th premolars at both sides of the lower jaws of Beagle dogs, one or two critical‐size vertical bone defects (4 mm vertical bone defect without buccal and lingual bone) on each side were surgically created. The defects were randomly subjected to the following groups: (1) Control (without bone‐defect‐filling materials); (2) 3D scaffold; (3) BMP2‐inc. BpNcCaP/HA‐functionalized 3D scaffold. Six weeks post‐surgery, samples were harvested and subjected to micro‐CT and histomorphometric analyses.

Results

The struts of the BMP2‐inc. BpNcCaP/HA‐func. 3D scaffold were covered by a thick layer of cemented irregular particles with an average pore size at 327 ± 27 μm. The BpNcCaP/HA‐func. 3D scaffold group bore significantly higher bone volume, bone volume fraction, trabecular number, trabecular thickness, bone mineral density, connectivity density, and bone volumes in three directions (mesiodistal, buccolingual, and apicocoronal) when compared with the groups of Control and 3D scaffold. Moreover, the BMP2‐inc. BpNcCaP/HA‐func. 3D scaffold group bore significantly lower trabecular separation and exhibited significantly higher bone‐to‐scaffold contact percentage and newly formed bone area percentage within pores in comparison with 3D scaffold.

Conclusions

BMP2‐inc. BpNcCaP/HA‐func. 3D scaffold dramatically enhanced vertical alveolar bone augmentation, which suggests a promising application potential of BMP2‐inc. BpNcCaP/HA‐func. 3D scaffold in dental clinic.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalTissue ScaffoldsBone Morphogenetic Protein 2Alveolar Ridge AugmentationAnimalsDogsCalcium PhosphatesX-Ray MicrotomographyHyaluronic AcidMandibleBone Regeneration

Stichwörter der Autor:innen

3D printed scaffoldbiomimeticbone morphogenetic protein‐2hyaluronic acidnanocrystalline calcium phosphatevertical bone regeneration

Substanzen

Bone Morphogenetic Protein 2Calcium PhosphatesHyaluronic Acidcalcium phosphate

Autor:innen und Institutionen

  • Department of Oral and Maxillofacial Surgery, Leiden University Medical Center (LUMC), Leiden, The Netherlands.
  • School/Hospital of Stomatology, Zhejiang Chinese Medical University, Hangzhou, China.
  • Savid School of Stomatology, Hangzhou Medical College, Hangzhou, China.
  • Department of Stomatology, Zhejiang Chinese Medical University, Hangzhou, China.
  • The Second Affiliated Hospital of Zhejiang University School of Medicine, Hangzhou, China.
  • Hangzhou Huibo Science and Technology Co. Ltd., Hangzhou, China.

ORCID-Profile: Ting Wang, Gaoli Xu, Tymour Forouzanfar, Gang Wu, Haiyan Lin

Förderung

  • China Scholarship Council
  • Key Research and Development Program of Zhejiang Province

Zitieren

APA

Wang, T., Xu, G., Zhang, C., Forouzanfar, T., Liang, J., Pan, Y., Shen, C., Wu, G., & Lin, H. (2025). Osteoinductively Functionalized 3D ‐Printed Scaffold for Vertical Bone Augmentation in Beagle Dogs. Clinical Implant Dentistry and Related Research. https://doi.org/10.1111/cid.13408

Vancouver

Wang T, Xu G, Zhang C, Forouzanfar T, Liang J, Pan Y, et al. Osteoinductively Functionalized 3D ‐Printed Scaffold for Vertical Bone Augmentation in Beagle Dogs. Clinical Implant Dentistry and Related Research. 2025. doi:10.1111/cid.13408

BibTeX
@article{Wang2025,
  author = {Wang, Ting and Xu, Gaoli and Zhang, Chuankai and Forouzanfar, Tymour and Liang, Junwei and Pan, Yulei and Shen, Chenxi and Wu, Gang and Lin, Haiyan},
  title = {Osteoinductively Functionalized 3D ‐Printed Scaffold for Vertical Bone Augmentation in Beagle Dogs},
  journal = {Clinical Implant Dentistry and Related Research},
  year = {2025},
  doi = {10.1111/cid.13408}
}
Kostenlos starten →