EUVIMEDEUVIMED entdecken
Klinische StudieMultizentrische StudieOpen Access · CC BY-NC 4.0

3D ‐printed model for resection of positive surgical margins in robot‐assisted prostatectomy

Christian Engesser iD, Philipp Brantner, Brigitta Gahl, Matthias Walter iD, Julian Gehweiler, Helge Seifert, Svetozar Subotic, Cyrill Rentsch, Christian Wetterauer iD, Lukas Bubendorf, Tatjana Vlajnic, Abolfazl Hosseini und 1 weitere

BJU International · 2025

DOI: 10.1111/bju.16595 ↗

Kurz gefasst

Klinische Studie in der Zeitschrift BJU International, 2025. Verfasst von Christian Engesser und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Urology, University Hospital Basel, Basel, Switzerland. Hauptthemen laut MEDLINE: Margins of Excision, Printing, Three-Dimensional, Prostatectomy, Prostatic Neoplasms. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Intuitive Surgical.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To improve precision of secondary resection (SR) after positive surgical margin (PSM) detection by frozen section (FS) during nerve‐sparing (NS) robot‐assisted radical prostatectomy (RARP) by employing a personalised three‐dimensional (3D)‐printed prostate model derived from pelvic magnetic resonance imaging (MRI). This model was used to mark positive surgical margins (PSM) and guide intraoperative SR during NS‐RARP. Patients and Methods Prospective multicentre cohort study with 100 patients undergoing NS‐RARP between September 2018 and August 2021. Primary and secondary endpoints were the conversion rate of FS‐identified PSM to a tumour‐free margin and functional/oncological parameters within a 12‐month follow‐up, respectively.

Results

A PSM was identified in 23% of cases during FS, with a conversion to negative surgical margins (NSM) in 83% (19/23 cases) by model‐guided SR. The tumour detection rate in SR specimens was 39% (nine of 23 cases). Among the 19 patients with converted margins, 18 (95%) achieved undetectable prostate‐specific antigen levels 2 months postoperatively, with six (32%) having subsequent biochemical recurrence within 12 months. prostate‐specific‐membrane‐antigen positron emission tomography computed tomography found one local recurrence, and five cases of metastatic disease. In converted patients, the baseline median five‐item version of the International Index of Erectile Function score decreased by 16% after 1 year, with no significant difference compared to patients with primarily NSM. Limitations include the absence of a control group, the potential for false‐negative FS results and limited accuracy of MRI.

Conclusion

The integration of 3D‐printed prostate models into NS‐RARP has the potential to positively impact surgical outcomes by improving the precision of SR and optimising pathosurgical communication.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Margins of ExcisionPrinting, Three-DimensionalProstatectomyProstatic NeoplasmsRobotic Surgical ProceduresAgedHumansMaleMiddle AgedMagnetic Resonance ImagingProspective StudiesProstate

Stichwörter der Autor:innen

functional outcomenerve sparingprostate cancerradical prostatectomythree‐dimensional printing

Autor:innen und Institutionen

  • Department of Urology, University Hospital Basel, Basel, Switzerland.
  • Department of Radiology, University Hospital Basel, Basel, Switzerland.
  • Department of Radiology, Gesundheitszentrum Fricktal, Rheinfelden, Switzerland.
  • Surgical Outcome Research Center, University Hospital Basel, University of Basel, Basel, Switzerland.
  • Department of Urology, Cantonal Hospital Baselland, Liestal, Switzerland.
  • Department of Pathology, University Hospital Basel, Basel, Switzerland.

ORCID-Profile: Christian Engesser, Matthias Walter, Christian Wetterauer

Förderung

  • Intuitive Surgical

Zitieren

APA

Engesser, C., Brantner, P., Gahl, B., Walter, M., Gehweiler, J., Seifert, H., Subotic, S., Rentsch, C., Wetterauer, C., Bubendorf, L., Vlajnic, T., Hosseini, A., & Ebbing, J. (2025). 3D ‐printed model for resection of positive surgical margins in robot‐assisted prostatectomy. BJU International. https://doi.org/10.1111/bju.16595

Vancouver

Engesser C, Brantner P, Gahl B, Walter M, Gehweiler J, Seifert H, et al. 3D ‐printed model for resection of positive surgical margins in robot‐assisted prostatectomy. BJU International. 2025. doi:10.1111/bju.16595

BibTeX
@article{Engesser2025,
  author = {Engesser, Christian and Brantner, Philipp and Gahl, Brigitta and Walter, Matthias and Gehweiler, Julian and Seifert, Helge and Subotic, Svetozar and Rentsch, Cyrill and Wetterauer, Christian and Bubendorf, Lukas and Vlajnic, Tatjana and Hosseini, Abolfazl and Ebbing, Jan},
  title = {3D ‐printed model for resection of positive surgical margins in robot‐assisted prostatectomy},
  journal = {BJU International},
  year = {2025},
  doi = {10.1111/bju.16595}
}
Kostenlos starten →