EUVIMEDEUVIMED entdecken
Vergleichsstudie

A comparative in vitro study of distinct and novel stent geometries on mechanical performances of poly‐L‐lactic acid cardiovascular stents

Jinwoo Kim, Jung Ho Lee, Eun Ae Choi, Hyeon Ji Lee, Jin Oh, Dae-Heung Byeon, Chan Hee Park iD

Artificial Organs · 2025

DOI: 10.1111/aor.14893 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Artificial Organs, 2025. Verfasst von Jinwoo Kim und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Bionanosystem Engineering, Graduate School, Jeonbuk National University, Jeonju, Republic of Korea. Hauptthemen laut MEDLINE: Polyesters, Stents, Absorbable Implants. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: Korea Medical Device Development Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Poly‐L‐lactic acid (PLLA) is one of the representative polymeric materials serving as bioresorbable stents (BRS) for cardiovascular disease due to its proper biodegradation, high biocompatibility, and adequate mechanical properties among polymer candidates for BRS. However, PLLA BRS as cardiovascular stents also have limitations because their mechanical properties including low radial strength and high elastic recoil are inferior to those of metallic‐based BRS stents.

Methods

In the study, we developed and manufactured distinct and novel types of stent geometries for investigating mechanical properties of thin‐walled PLLA BRS (110 μm) for cardiovascular applications. Five key mechanical tests, including radial strength, crimping profile, flexibility, elastic recoil, and foreshortening were performed through a comprehensive analysis. In addition, we applied the finite element method for further validation and insight of mechanical behaviors of the PLLA BRS.

Results

Results revealed that Model 2 had advantages in high flexibility as well as radial strengths, which would be a proper option for complex and acutely curved lesions. Model 3 would be an optimum selection for stent placement in mild target site due to its strength in minimum elastic recoil. Even though Model 4 showed the highest radial strength, finite element simulation showed that the geometry caused higher maximum stress than that of Model 2 and Model 3 during the crimping process. Model 1 showed the most vulnerable geometry among the tested models in both in vitro and finite element analysis.

Conclusion

Such data may suggest potential guidance in regard to understanding the mechanical behaviors of PLLA BRS as not only applicable cardiovascular but also peripheral and intracranial stents.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersStentsAbsorbable ImplantsMaterials TestingFinite Element AnalysisProsthesis DesignHumansStress, Mechanical

Stichwörter der Autor:innen

bioresorbable stentelastic recoilpoly‐L‐lactic acid (PLLA)radial strengthstent geometry

Substanzen

Polyesterspoly(lactide)

Autor:innen und Institutionen

  • Department of Bionanosystem Engineering, Graduate School, Jeonbuk National University, Jeonju, Republic of Korea.
  • Division of Mechanical Design Engineering, Jeonbuk National University, Jeonju, Republic of Korea.
  • Innovative Mechanobio Active Materials Based Medical Device Demonstration Center, Jeonbuk National University, Jeonju, Republic of Korea.
  • Department of Bionanotechnology and Bioconvergence Engineering, Graduate School, Jeonbuk National University, Jeonju, Republic of Korea.
  • CGBio Co. Ltd., Seongnam, Republic of Korea.

ORCID-Profile: Chan Hee Park

Förderung

  • Korea Medical Device Development Fund

Zitieren

APA

Kim, J., Lee, J. H., Choi, E. A., Lee, H. J., Oh, J., Byeon, D. H., & Park, C. H. (2025). A comparative in vitro study of distinct and novel stent geometries on mechanical performances of poly‐L‐lactic acid cardiovascular stents. Artificial Organs. https://doi.org/10.1111/aor.14893

Vancouver

Kim J, Lee JH, Choi EA, Lee HJ, Oh J, Byeon DH, et al. A comparative in vitro study of distinct and novel stent geometries on mechanical performances of poly‐L‐lactic acid cardiovascular stents. Artificial Organs. 2025. doi:10.1111/aor.14893

BibTeX
@article{Kim2025,
  author = {Kim, Jinwoo and Lee, Jung Ho and Choi, Eun Ae and Lee, Hyeon Ji and Oh, Jin and Byeon, Dae-Heung and Park, Chan Hee},
  title = {A comparative in vitro study of distinct and novel stent geometries on mechanical performances of poly‐L‐lactic acid cardiovascular stents},
  journal = {Artificial Organs},
  year = {2025},
  doi = {10.1111/aor.14893}
}
Kostenlos starten →