Current progress on engineering microbial strains and consortia for production of cellulosic butanol through consolidated bioprocessing
Microbial Biotechnology · 2023-02 · 16 (2) · 238-261
DOI: 10.1111/1751-7915.14148 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Microbial Biotechnology, online erschienen am 27.09.2022. Verfasst von Angela Re und 1 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Sustainable Future Technologies, Fondazione Istituto Italiano di Tecnologia, Torino, Italy. Hauptthemen laut MEDLINE: Butanols, 1-Butanol. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 203 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In the last decades, fermentative production of n‐butanol has regained substantial interest mainly owing to its use as drop‐in‐fuel. The use of lignocellulose as an alternative to traditional acetone–butanol–ethanol fermentation feedstocks (starchy biomass and molasses) can significantly increase the economic competitiveness of biobutanol over production from non‐renewable sources (petroleum). However, the low cost of lignocellulose is offset by its high recalcitrance to biodegradation which generally requires chemical‐physical pre‐treatment and multiple bioreactor‐based processes. The development of consolidated processing (i.e., single‐pot fermentation) can dramatically reduce lignocellulose fermentation costs and promote its industrial application. Here, strategies for developing microbial strains and consortia that feature both efficient (hemi)cellulose depolymerization and butanol production will be depicted, that is, rational metabolic engineering of native (hemi)cellulolytic or native butanol‐producing or other suitable microorganisms; protoplast fusion of (hemi)cellulolytic and butanol‐producing strains; and co‐culture of (hemi)cellulolytic and butanol‐producing microbes. Irrespective of the fermentation feedstock, biobutanol production is inherently limited by the severe toxicity of this solvent that challenges process economic viability. Hence, an overview of strategies for developing butanol hypertolerant strains will be provided.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Centre for Sustainable Future Technologies, Fondazione Istituto Italiano di Tecnologia, Torino, Italy.
- Department of Applied Science and Technology, Politecnico di Torino, Turin, Italy.
- Structural and Functional Biochemistry, Laboratory of Proteomics and Metabolic Engineering of Prokaryotes, Department of Life Sciences and Systems Biology, University of Torino, Torino, Italy.
ORCID-Profile: Angela Re, Roberto Mazzoli
Zitieren
APA
Re, A., & Mazzoli, R. (2023). Current progress on engineering microbial strains and consortia for production of cellulosic butanol through consolidated bioprocessing. Microbial Biotechnology, 16(2), 238-261. https://doi.org/10.1111/1751-7915.14148
Vancouver
Re A, Mazzoli R. Current progress on engineering microbial strains and consortia for production of cellulosic butanol through consolidated bioprocessing. Microbial Biotechnology. 2023;16(2):238-261. doi:10.1111/1751-7915.14148
BibTeX
@article{Re2023,
author = {Re, Angela and Mazzoli, Roberto},
title = {Current progress on engineering microbial strains and consortia for production of cellulosic butanol through consolidated bioprocessing},
journal = {Microbial Biotechnology},
year = {2023},
volume = {16},
number = {2},
pages = {238--261},
doi = {10.1111/1751-7915.14148}
}
EUVIMED