EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasound‐Assisted Extraction Using a 3D‐Printed Device Functionalized With SPE Sorbent for UHPLC‐DAD Analysis of Pesticide Residues in Honey

Daniela Lupu, Gabriel Hancu, Laura Ferrer iD

Journal of Food Science · 2026-01 · 91 (1)

DOI: 10.1111/1750-3841.70788 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Food Science, online erschienen am 28.12.2025. Verfasst von Daniela Lupu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Environmental Analytical Chemistry Group, University of the Balearic Islands, Palma, Spain. Hauptthemen laut MEDLINE: Honey, Pesticide Residues, Solid Phase Extraction, Printing, Three-Dimensional. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministry of Science, Innovation and Universities, through the State Research Agency:, University of Medicine, Pharmacy, Science and Technology "George Emil Palade":.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The presence of pesticide residues in honey represents a significant concern for food safety and public health, underscoring the need for advanced analytical techniques capable of ensuring accurate detection and effective food control. In this study, a stereolithographically 3D‐printed device coated with the solid‐phase extraction (SPE) sorbent Oasis MCX was developed for the ultrasound‐assisted extraction (UAE) of pesticide residues in honey, followed by ultra‐high performance liquid chromatography with diode array detection (UHPLC‐DAD) analysis. Variables that affect the performance of the 3D‐printed extraction (i.e., design and fabrication of 3D‐printed device, SPE resin, elution solution, pH, and ultrasonic conditions) and the chromatographic analysis were systematically evaluated. The optimized methodology allowed the simultaneous determination of five pesticides: azoxystrobin (AZO), carbaryl (CAR), pirimicarb (PIR), thiacloprid (THC), and thiamethoxam (THI). Chromatographic separation was completed in less than 15 min using a KinetexXB‐C18 column (2.6 µm, 100 Å, 100 × 3 mm), with a mobile phase consisting of methanol and 0.1% formic acid (pH 3.35). The proposed methodology showed satisfactory agreement compared with commercial QuEChERS dispersive SPE kits. The developed method demonstrated good linearity up to 100 mg L −1 ( R 2 > 0.99), low detection limits (0.002–0.5 mg kg −1 ), good precision (< 5.1 % RSD), and satisfactory recoveries (90–109 %). Its successful application to real honey samples demonstrates the method's potential for reliable multi‐residue pesticide analysis in complex food matrices. The sample preparation stage was evaluated with the AGREEprep tool, yielding a greenness score of 0.43, which indicates a moderately green performance.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HoneyPesticide ResiduesSolid Phase ExtractionPrinting, Three-DimensionalFood ContaminationChromatography, High Pressure LiquidLimit of Detection

Stichwörter der Autor:innen

3D‐printed deviceSPEUAEUHPLChoneypesticides

Substanzen

Pesticide Residues

Autor:innen und Institutionen

  • Environmental Analytical Chemistry Group, University of the Balearic Islands, Palma, Spain.
  • Department of Pharmaceutical and Therapeutic Chemistry, Faculty of Pharmacy, "George Emil Palade" University of Medicine, Pharmacy, Science and Technology of Târgu Mures, Târgu Mures, Romania.

ORCID-Profile: Laura Ferrer

Förderung

  • Spanish Ministry of Science, Innovation and Universities, through the State Research Agency:
  • University of Medicine, Pharmacy, Science and Technology "George Emil Palade":

Zitieren

APA

Lupu, D., Hancu, G., & Ferrer, L. (2026). Ultrasound‐Assisted Extraction Using a 3D‐Printed Device Functionalized With SPE Sorbent for UHPLC‐DAD Analysis of Pesticide Residues in Honey. Journal of Food Science, 91(1). https://doi.org/10.1111/1750-3841.70788

Vancouver

Lupu D, Hancu G, Ferrer L. Ultrasound‐Assisted Extraction Using a 3D‐Printed Device Functionalized With SPE Sorbent for UHPLC‐DAD Analysis of Pesticide Residues in Honey. Journal of Food Science. 2026;91(1). doi:10.1111/1750-3841.70788

BibTeX
@article{Lupu2026,
  author = {Lupu, Daniela and Hancu, Gabriel and Ferrer, Laura},
  title = {Ultrasound‐Assisted Extraction Using a 3D‐Printed Device Functionalized With SPE Sorbent for UHPLC‐DAD Analysis of Pesticide Residues in Honey},
  journal = {Journal of Food Science},
  year = {2026},
  volume = {91},
  number = {1},
  doi = {10.1111/1750-3841.70788}
}
Kostenlos starten →