EUVIMEDEUVIMED entdecken
Crossref

Development of effluent‐free dry‐peeling method for shallots ( Allium cepa L. aggregatum): Spectral characterization of mid and long infrared peak wavelengths for maximizing the peeling performance

Sakthivel Deepika iD, Parag Prakash Sutar iD

Journal of Food Science · 2023

DOI: 10.1111/1750-3841.16482 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Food Science, 2023. Verfasst von Sakthivel Deepika und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Food Process Engineering, National Institute of Technology, Rourkela, Odisha, India. Hauptthemen laut MEDLINE: Shallots. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Science and Engineering Research Board, Ministry of Education, Government of India.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Different wavelength emitting infrared (IR) lamps (transparent quartz tungsten (TQT), ruby‐coated quartz tungsten (RCQT), and ceramic) were used for dry peeling and evaluating the spectral characteristics of emitted radiations. The maximum temperatures for ceramic, RCQT, and TQT were 560, 662, and 861°C, respectively. The peak wavelength determined by Wien's law was between 3.37 and 21.47 µm. Comparatively, longer wavelength was emitted by ceramic lamp. The spectral emissive power determined by Stefan Boltzmann's law was 1.14–37.49 kW m −2 using the IR emitters at different power levels. The radiant efficiency was higher for the ceramic lamp. The peak wavelength and emissive power had a major influence on the peeling performance and quality during IR peeling. The optimized parameters for IR dry peeling of shallots are 60 mm distance between lamp and product, 59.74% IR power level, 15 min of heating time using the ceramic (peak wavelength 8.16 µm) lamp. Practical Application: Infrared dry peeling of shallots is a sustainable alternative to traditional peeling methods that leaves adverse environmental footprints. Spectral characteristics of the infrared lamp can be used to determine the suitable emitter for the dry‐peeling operation. It is necessary to check the wavelength emitted by the source for designing the IR system based on the food product and application. This study will be helpful in food processing industries to use an effective infrared lamp that can efficiently peel the agricultural product and sustainably maintain quality.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ShallotsOnionsQuartzTungstenInfrared Rays

Stichwörter der Autor:innen

emissive powerpeak wavelengthpeeling performancequalitytemperature

Substanzen

QuartzTungsten

Autor:innen und Institutionen

  • Department of Food Process Engineering, National Institute of Technology, Rourkela, Odisha, India.

ORCID-Profile: Sakthivel Deepika, Parag Prakash Sutar

Förderung

  • Science and Engineering Research Board
  • Ministry of Education, Government of India

Zitieren

APA

Deepika, S., & Sutar, P. P. (2023). Development of effluent‐free dry‐peeling method for shallots ( Allium cepa L. aggregatum): Spectral characterization of mid and long infrared peak wavelengths for maximizing the peeling performance. Journal of Food Science. https://doi.org/10.1111/1750-3841.16482

Vancouver

Deepika S, Sutar PP. Development of effluent‐free dry‐peeling method for shallots ( Allium cepa L. aggregatum): Spectral characterization of mid and long infrared peak wavelengths for maximizing the peeling performance. Journal of Food Science. 2023. doi:10.1111/1750-3841.16482

BibTeX
@article{Deepika2023,
  author = {Deepika, Sakthivel and Sutar, Parag Prakash},
  title = {Development of effluent‐free dry‐peeling method for shallots ( Allium cepa L. aggregatum): Spectral characterization of mid and long infrared peak wavelengths for maximizing the peeling performance},
  journal = {Journal of Food Science},
  year = {2023},
  doi = {10.1111/1750-3841.16482}
}
Kostenlos starten →